Hi,
On 28. 04. 20 12:53, Major A wrote:
> Hi Michal,
>
> Xilinx doesn't like me. Here's the output and where I get stuck:
>
> xsdb% targets -set -filter {name =~ "PSU"}
> no targets found with "name =~ "PSU"". available targets:
> 1 whole scan chain (DR shift through all zeroes)
> xsdb%
>
> Any ideas? Any jumpers I failed to set? Boot mode is set to JTAG.check jtag ta - that you see the board. Reset the board, check that jtag mode pins again. Thanks, Michal
