hi, that's quite weird. Did you try any petalinux bsp and boot petalinux boot.bin on that board to make sure that board is fine?
M On 30. 04. 20 13:01, Major A wrote: > Hi Michal, > > Sorry I misunderstood your message, and I didn't spot the attached > files. Now I booted with those two files, there's no output on the > UARTs whatsoever. Is there anything else I can try? > > Cheers, > > András > > > On 30/04/2020 12:33, Michal Simek wrote: >> Hi, >> >> On 30. 04. 20 12:19, Major A wrote: >>> Hi Michal, >>> >>>> can you please try these files in SD boot mode? >>> >>> Done, here are two logs, both in SD boot mode. >>> >>> First, log.sd is with SD card inserted (with the image files that >>> apparently refuse to work other than the early UART message). >>> >>> The other file, log.no-sd, is with no card inserted. >> >> we don't understand each other. I sent you boot.bin and image.itb. Just >> copy them to SD card, switch board to sd boot mode and power it up. >> >> Thanks, >> Michal >>
