Hi Michal, "ta" returns the same thing whatever I do:
1 whole scan chain (DR shift through all zeroes) Any ideas? SW6 is set to on/on/on/on. Anything else that needs setting? Cheers, András On 28/04/2020 13:16, Michal Simek wrote:
Hi, On 28. 04. 20 12:53, Major A wrote:Hi Michal, Xilinx doesn't like me. Here's the output and where I get stuck: xsdb% targets -set -filter {name =~ "PSU"} no targets found with "name =~ "PSU"". available targets: 1 whole scan chain (DR shift through all zeroes) xsdb% Any ideas? Any jumpers I failed to set? Boot mode is set to JTAG.check jtag ta - that you see the board. Reset the board, check that jtag mode pins again. Thanks, Michal
