[U-Boot] [PATCH 3/3] misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998

[Lukasz Majewski]

TRATS target uses MAX8997 PMIC device instead of MAX8998.

Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
Cc: Minkyu Kang <mk7.k...@samsung.com>
Cc: Stefano Babic <sba...@denx.de>
---
 board/samsung/trats/trats.c |   27 ++++++++++-----------------
 include/configs/trats.h     |    2 +-
 2 files changed, 11 insertions(+), 18 deletions(-)

diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index aa4291d..a7b4e4a 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -32,7 +32,7 @@
 #include <asm/arch/power.h>
 #include <pmic.h>
 #include <usb/s3c_udc.h>
-#include <max8998_pmic.h>
+#include <max8997_pmic.h>
 
 #include "setup.h"
 
@@ -216,26 +216,19 @@ static int s5pc210_phy_control(int on)
                return -1;
 
        if (on) {
-               ret |= pmic_set_output(p,
-                                      MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
-                                      MAX8998_SAFEOUT1, LDO_ON);
-               ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
-                                     MAX8998_LDO3, LDO_ON);
-               ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
-                                     MAX8998_LDO8, LDO_ON);
-
+               ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+                                     ENSAFEOUT1, LDO_ON);
+               ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO);
+               ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO);
        } else {
-               ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
-                                     MAX8998_LDO8, LDO_OFF);
-               ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
-                                     MAX8998_LDO3, LDO_OFF);
-               ret |= pmic_set_output(p,
-                                      MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
-                                      MAX8998_SAFEOUT1, LDO_OFF);
+               ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO);
+               ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO);
+               ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+                                     ENSAFEOUT1, LDO_OFF);
        }
 
        if (ret) {
-               puts("MAX8998 LDO setting error!\n");
+               puts("MAX8997 LDO setting error!\n");
                return -1;
        }
 
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 10f11d9..585fd71 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -208,7 +208,7 @@
 
 #define CONFIG_PMIC
 #define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX8998
+#define CONFIG_PMIC_MAX8997
 
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
-- 
1.7.2.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot