On Tue, Sep 22, 2026 at 10:41:18AM +0000, Jim Liu wrote: > This series collects a set of fixes and configuration updates for the > Nuvoton NPCM845 (Arbel) SoC and its evaluation board. > > - Report the correct DRAM size when a 4GB module is used with ECC > enabled, where part of the memory is consumed by ECC data. > > - Drop the system counter setup from U-Boot. On NPCM845 those > registers may be marked secure and reject the access; BL31 is > already responsible for programming them. > > - Select GFX_PLL as the pixel clock source on the EVB, and enable the > matching command along with a few other commands and drivers in > arbel_evb_defconfig (watchdog, GFX, GigaDevice SPI NOR and SHA512 > hardware acceleration). > > - Relax the default network timeouts so that large images can still be > fetched over a slow link, and add a 'stopwdt' helper to the default > environment. > > - Adjust the Ethernet PHY reset delay on the EVB. > > The series is based on u-boot/master and was build-tested with > arbel_evb_defconfig and boot-tested on an NPCM845 EVB.
This isn't showing up in lore, can you please re-send to the current u-boot mailing list address? Thanks. -- Tom
signature.asc
Description: PGP signature
