Nope, same abbreviated encryption drop-down in 5.5.9, same choices, same result. Is that menu the same in all XM firmware?
I'm preparing myself to hear that this is a cross-platform issue, not Ubiquiti's job.. JG From: [email protected] [mailto:[email protected]] On Behalf Of Jeremy Grip Sent: Monday, October 20, 2014 5:49 PM To: 'Ubiquiti Users Group' Subject: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 in trees) So.. I went to replace one of those NanoBridge M2's with a NanoBeam M2 after upgrading it to 5.5.10. The (Wavion) AP is configured for WPA2 mixed mode PSK // AES +TKIP // PSK by passphrase and all of the NanoBridges were authenticating fine set for WPA2-TKIP // PSK and the passphrase or WPA2-AES // PSK and the passphrase. However, the 'Beam running 5.5.10 has no WPA2-TKIP setting, only WPA2-AES. It will not authenticate with that setting and the proper passphrase. The log of the AP shows an "incorrect password" message. Going to downgrade to 5.5.9 and try it again... Jeremy Grip North Branch Networks,LLC
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
