š±
> On Oct 20, 2014, at 7:19 PM, "Rory Conaway" <[email protected]> wrote: > > Iām not running TKIP. In fact, Iām not running any security. > > Rory > > From: [email protected] [mailto:[email protected]] On > Behalf Of Kevin Lamothe > Sent: Monday, October 20, 2014 3:29 PM > To: Jeremy Grip; 'Ubiquiti Users Group' > Subject: Re: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 in > trees) > > That's the normal behavior on XW units. Updated wireless spec discontinued > TKIP and WEP for authentication methods. > > Can you force your AP to run in AES mode only? TKIP also limits you from > using the higher QAM16 and QAM64 rates ie mcs 13-15 > > > Sent from Samsung Mobile > > > -------- Original message -------- > From: Jeremy Grip > Date:2014-10-20 17:49 (GMT-05:00) > To: 'Ubiquiti Users Group' > Subject: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 in trees) > > > Soā¦. > I went to replace one of those NanoBridge M2ās with a NanoBeam M2 after > upgrading it to 5.5.10. The (Wavion) AP is configured for WPA2 mixed mode PSK > // AES +TKIP // PSK by passphrase and all of the NanoBridges were > authenticating fine set for WPA2-TKIP // PSK and the passphrase or WPA2-AES > // PSK and the passphrase. However, the āBeam running 5.5.10 has no WPA2-TKIP > setting, only WPA2-AES. It will not authenticate with that setting and the > proper passphrase. The log of the AP shows an āincorrect passwordā message. > Going to downgrade to 5.5.9 and try it againā¦.. > > > Jeremy Grip > North Branch Networks,LLC > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
