Never have. I wanted users to connect in the system and then let the billing system handle it. Hotspot mentality. We have changed that but it doesn’t explain what is happening.
Rory From: [email protected] [mailto:[email protected]] On Behalf Of Matt Hoppes Sent: Monday, October 20, 2014 4:31 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 intrees) 😱 On Oct 20, 2014, at 7:19 PM, "Rory Conaway" <[email protected]> wrote: I’m not running TKIP. In fact, I’m not running any security. Rory From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Lamothe Sent: Monday, October 20, 2014 3:29 PM To: Jeremy Grip; 'Ubiquiti Users Group' Subject: Re: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 in trees) That's the normal behavior on XW units. Updated wireless spec discontinued TKIP and WEP for authentication methods. Can you force your AP to run in AES mode only? TKIP also limits you from using the higher QAM16 and QAM64 rates ie mcs 13-15 Sent from Samsung Mobile -------- Original message -------- From: Jeremy Grip Date:2014-10-20 17:49 (GMT-05:00) To: 'Ubiquiti Users Group' Subject: [Ubnt_users] 5.5.10 Security Bug? (was NBM2 vs. PBE M2-400 in trees) So…. I went to replace one of those NanoBridge M2’s with a NanoBeam M2 after upgrading it to 5.5.10. The (Wavion) AP is configured for WPA2 mixed mode PSK // AES +TKIP // PSK by passphrase and all of the NanoBridges were authenticating fine set for WPA2-TKIP // PSK and the passphrase or WPA2-AES // PSK and the passphrase. However, the ‘Beam running 5.5.10 has no WPA2-TKIP setting, only WPA2-AES. It will not authenticate with that setting and the proper passphrase. The log of the AP shows an “incorrect password” message. Going to downgrade to 5.5.9 and try it again….. Jeremy Grip North Branch Networks,LLC _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
