Yes, and the blue light on the FiberPOE does not light that way, but does light up when anto negotiation is selected.
On 9/12/2016 8:49 PM, Nate Burke wrote: > Did you try setting the speed/duplex instead of using Auto negotiate? > > On 9/12/2016 7:34 PM, Jeff Evans wrote: >> I have an RB2011UiAS that I want to use for a customers home router, we >> have an 800 foot fiber run to a ubnt FiberPOE. Any modules I've tried >> only show Tx on the Interface, I have also tried the modules on a >> Netonix switch (replacing the FiberPoe) with the same result. >> >> The fiber modules that I have tried : Mikrotik S35LC20D/S53LC20D pair -- >> MAXXwave MW-1315-SM-US/MW-1513-SM-US pair >> the above both give me the blue light of success on the >> FiberPOE but no real joy. >> >> AND a set of Maxxwave MW-LX-SM-US -- dual fiber, no light on the >> FiberPOE with this. >> >> any ideas? Thanks! >> > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- Jeff Evans, Managing Member PennWisp, LLC www.pennwisp.com _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
