Re: [Ubnt_users] Radios won't operate on the same channel

[Roy]

I have several codes but there is no "Activate" button.  At the suggestion of another member of the mailing list, I regressed the Nanobridge to 5.6.9 and then the "Activate" button appeared.  I did than and then reinstalled 6.1.3.  Luckily I had a copy of 5.6.9 in my library To save anyone the digging to find out how to regress, I think these are the steps I used.  1) install 6.0.6 2) Install 6.0.6 beta 3) reboot 4) install 5.6.9 Roy On 11/28/2017 9:55 PM, Mimbres Communications wrote: Do you have an unlock code for the NBM5? On Tue, Nov 28, 2017 at 9:50 PM, Roy <r.engehau...@gmail.com> wrote: I have a Nanobridge running 6.1.3 trying to connect to a Nanostation also running 6.1.3 The Nanostation is the AP and set for 5630 Mhz.  The Nanobridge won't connect since it doesn't seem to allow operation on that channel? A check of allowed channels has the Nanobridge missing 5585 to 5655 Mhz Any ideas on how to fix this? Roy _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042 _______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users

_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users