ssh into the radio and
ubntbox dfs-unlock -u "YOUR COMPANY NAME" YOUR_ACTIVATION_CODE
On 11/29/2017 01:07 PM, Roy wrote:
I have several codes but there is no "Activate" button. At the
suggestion of another member of the mailing list, I regressed the
Nanobridge to 5.6.9 and then the "Activate" button appeared. I did
than and then reinstalled 6.1.3. Luckily I had a copy of 5.6.9 in my
library
To save anyone the digging to find out how to regress, I think these
are the steps I used.
1) install 6.0.6
2) Install 6.0.6 beta
3) reboot
4) install 5.6.9
Roy
On 11/28/2017 9:55 PM, Mimbres Communications wrote:
Do you have an unlock code for the NBM5?
On Tue, Nov 28, 2017 at 9:50 PM, Roy <[email protected]
<mailto:[email protected]>> wrote:
I have a Nanobridge running 6.1.3 trying to connect to a Nanostation
also running 6.1.3
The Nanostation is the AP and set for 5630 Mhz. The Nanobridge won't
connect since it doesn't seem to allow operation on that channel?
A check of allowed channels has the Nanobridge missing 5585 to
5655 Mhz
Any ideas on how to fix this?
Roy
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
--
Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
