Right -- the old codes were for v5 firmware. Once the activation is complete, the v6 update will retain it.
On Wed, Nov 29, 2017 at 12:07 PM, Roy <[email protected]> wrote: > > > I have several codes but there is no "Activate" button. At the suggestion > of another member of the mailing list, I regressed the Nanobridge to 5.6.9 > and then the "Activate" button appeared. I did than and then reinstalled > 6.1.3. Luckily I had a copy of 5.6.9 in my library > > To save anyone the digging to find out how to regress, I think these are > the steps I used. > > 1) install 6.0.6 > 2) Install 6.0.6 beta > 3) reboot > 4) install 5.6.9 > > Roy > > > > > On 11/28/2017 9:55 PM, Mimbres Communications wrote: > > Do you have an unlock code for the NBM5? > > On Tue, Nov 28, 2017 at 9:50 PM, Roy <[email protected]> wrote: > >> >> I have a Nanobridge running 6.1.3 trying to connect to a Nanostation >> also running 6.1.3 >> >> The Nanostation is the AP and set for 5630 Mhz. The Nanobridge won't >> connect since it doesn't seem to allow operation on that channel? >> >> A check of allowed channels has the Nanobridge missing 5585 to 5655 Mhz >> >> Any ideas on how to fix this? >> >> Roy >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > > -- > > Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042 > <(575)%20342-0042> > > > > _______________________________________________ > Ubnt_users mailing > [email protected]http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
