apport information

** Tags added: precise

** Description changed:

  I am running a fresh install of Ubuntu Oneiric 11.10 64-bit. After
  installing Gnome15 to use my LCD display, the occasional xhci_hcd error
  message turns into a waterfall of messages which filled up my
  '/var/log/syslog' and '/var/log/kern.log' logs up to the point where the
  system crashes. Within one hour these files blew up into 33GB (!) log
  files.
  
  The LCD is working fine and I had the problems before when I tried use
  the extra features of my Logitech G15 via the USB 3.0 connector on my
  system. The G15 is a low speed USB 2.0 device.
  
  Post from dmesg:
  [   62.496997] xhci_hcd 0000:05:00.0: ERROR no room on ep ring
  [   62.497005] usb 5-2.4: usbfs: usb_submit_urb returned -12
  [   62.499905] xhci_hcd 0000:05:00.0: ERROR no room on ep ring
  [   62.499913] usb 5-2.4: usbfs: usb_submit_urb returned -12
  [   62.502844] xhci_hcd 0000:05:00.0: ERROR no room on ep ring
  [   62.502847] usb 5-2.4: usbfs: usb_submit_urb returned -12
  [   62.505902] xhci_hcd 0000:05:00.0: ERROR no room on ep ring
  [   62.505911] usb 5-2.4: usbfs: usb_submit_urb returned -12
  [   62.508900] xhci_hcd 0000:05:00.0: ERROR no room on ep ring
  [   62.508908] usb 5-2.4: usbfs: usb_submit_urb returned -12
  
  Dmesg from me plugging my G15 keyboard into another USB port (to show the 
device ids involved):
  [  313.191977] usb 2-1.5: new full speed USB device number 7 using ehci_hcd
  [  313.286537] hub 2-1.5:1.0: USB hub found
  [  313.286852] hub 2-1.5:1.0: 4 ports detected
  [  313.555590] usb 2-1.5.1: new low speed USB device number 8 using ehci_hcd
  [  313.656960] input: Logitech Logitech Gaming Keyboard as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/input/input15
  [  313.657081] generic-usb 0003:046D:C221.0006: input,hidraw2: USB HID v1.10 
Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:1d.0-1.5.1/input0
  [  313.662412] input: Logitech Logitech Gaming Keyboard as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/input/input16
  [  313.662561] generic-usb 0003:046D:C221.0007: input,hiddev0,hidraw3: USB 
HID v1.10 Device [Logitech Logitech Gaming Keyboard] on 
usb-0000:00:1d.0-1.5.1/input1
  [  313.731375] usb 2-1.5.4: new full speed USB device number 9 using ehci_hcd
  [  313.829219] input: G15 Keyboard G15 Keyboard as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/input/input17
  [  313.829594] generic-usb 0003:046D:C222.0008: input,hiddev0,hidraw4: USB 
HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.0-1.5.4/input0
  
  USB controllers on my computer:
  00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family 
USB Enhanced Host Controller #2 (rev 05)
  00:1a.0 0c03: 8086:1c2d (rev 05)
  
  03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller 
(rev 04)
  03:00.0 0c03: 1033:0194 (rev 04)
  05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller 
(rev 04)
  05:00.0 0c03: 1033:0194 (rev 04)
  
  I seem to have found a workaround by finding a native USB 2.0 port (from
  the Intel controller).
  
  Additional info:
  Signature: Ubuntu 3.0.0-12.20-generic 3.0.4
  
  03:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host 
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fb300000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00001000
                PBA: BAR=0 offset=00001080
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<4us, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
        Capabilities: [150 v1] #18
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci-hcd
  
  05:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host 
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
        Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fb200000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00001000
                PBA: BAR=0 offset=00001080
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<4us, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
        Capabilities: [150 v1] #18
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci-hcd
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  cyberwizzard   1796 F.... pulseaudio
   /dev/snd/controlC0:  cyberwizzard   1796 F.... pulseaudio
   /dev/snd/pcmC0D0p:   cyberwizzard   1796 F...m pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xfb420000 irq 63'
     Mixer name : 'Realtek ALC892'
     Components : 'HDA:10ec0892,10438469,00100302'
     Controls      : 35
     Simple ctrls  : 20
  Card1.Amixer.info:
   Card hw:1 'U0x46d0x8d7'/'USB Device 0x46d:0x8d7 at usb-0000:00:1d.0-1.2, 
full speed'
     Mixer name : 'USB Mixer'
     Components : 'USB046d:08d7'
     Controls      : 3
     Simple ctrls  : 2
  DistroRelease: Ubuntu 11.10
  HibernationDevice: RESUME=UUID=f894ce2a-5781-49bc-a11e-9f268085f583
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  IwConfig:
   lo        no wireless extensions.
   
   eth0      no wireless extensions.
  MachineType: System manufacturer System Product Name
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic 
root=UUID=20e1561c-ee2f-447b-a128-769fa5777bca ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
  RelatedPackageVersions:
   linux-restricted-modules-3.0.0-12-generic N/A
   linux-backports-modules-3.0.0-12-generic  N/A
   linux-firmware                            1.60
  RfKill:
   0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
  StagingDrivers: mei
  Tags:  oneiric running-unity staging
  Uname: Linux 3.0.0-12-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm admin cdrom dialout fuse lpadmin plugdev sambashare
  dmi.bios.date: 03/02/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1502
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: P8P67 PRO
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1502:bd03/02/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8P67PRO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
+ --- 
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
+ ApportVersion: 2.0.1-0ubuntu7
+ Architecture: amd64
+ AudioDevicesInUse:
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  cyberwizzard   2030 F.... pulseaudio
+  /dev/snd/pcmC0D0p:   cyberwizzard   2030 F...m pulseaudio
+ CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
+ Card0.Amixer.info:
+  Card hw:0 'PCH'/'HDA Intel PCH at 0xfb420000 irq 64'
+    Mixer name : 'Realtek ALC892'
+    Components : 'HDA:10ec0892,10438469,00100302'
+    Controls      : 40
+    Simple ctrls  : 19
+ DistroRelease: Ubuntu 12.04
+ HibernationDevice: RESUME=UUID=f894ce2a-5781-49bc-a11e-9f268085f583
+ InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
+ IwConfig:
+  lo        no wireless extensions.
+  
+  eth0      no wireless extensions.
+ MachineType: System manufacturer System Product Name
+ NonfreeKernelModules: nvidia
+ Package: linux (not installed)
+ ProcEnviron:
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
+ ProcFB: 0 VESA VGA
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic 
root=UUID=20e1561c-ee2f-447b-a128-769fa5777bca ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16
+ PulseList:
+  Error: command ['pacmd', 'list'] failed with exit code 1: Home directory 
/home/cyberwizzard not ours.
+  No PulseAudio daemon running, or not running as session daemon.
+ RelatedPackageVersions:
+  linux-restricted-modules-3.2.0-24-generic N/A
+  linux-backports-modules-3.2.0-24-generic  N/A
+  linux-firmware                            1.79
+ RfKill:
+  0: hci0: Bluetooth
+       Soft blocked: no
+       Hard blocked: no
+ SourcePackage: linux
+ StagingDrivers: mei
+ Tags:  precise staging precise staging
+ Uname: Linux 3.2.0-24-generic x86_64
+ UpgradeStatus: Upgraded to precise on 2012-04-13 (43 days ago)
+ UserGroups:
+  
+ dmi.bios.date: 03/02/2011
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: 1502
+ dmi.board.asset.tag: To be filled by O.E.M.
+ dmi.board.name: P8P67 PRO
+ dmi.board.vendor: ASUSTeK Computer INC.
+ dmi.board.version: Rev 1.xx
+ dmi.chassis.asset.tag: Asset-1234567890
+ dmi.chassis.type: 3
+ dmi.chassis.vendor: Chassis Manufacture
+ dmi.chassis.version: Chassis Version
+ dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1502:bd03/02/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8P67PRO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
+ dmi.product.name: System Product Name
+ dmi.product.version: System Version
+ dmi.sys.vendor: System manufacturer

** Attachment added: "AcpiTables.txt"
   
https://bugs.launchpad.net/bugs/883646/+attachment/3164867/+files/AcpiTables.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/883646

Title:
  "ERROR no room on ep ring" fills up syslog and hard disk in minutes

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/883646/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to