somehow I can't load the driver
That is what I am get when I do sudo modprobe snd_hda_intel:
me@me-Inspiron-15-3552:~$ sudo modprobe snd_hda_intel
[sudo] password for me:
modprobe: ERROR: could not insert 'snd_hda_intel': Package not installed
If it helps so, here is the content of "dmesg.txt"
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-167-generic (buildd@lgw01-amd64-031) (gcc
version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.4) ) #217-Ubuntu SMP Wed Mar 13
16:18:21 UTC 2019 (Ubuntu 3.13.0-167.217-generic 3.13.11-ckt39)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-167-generic
root=UUID=0573c2b5-3e43-4300-8e2b-a22c7a96c95e ro quiet splash radeon.modeset=0
nouveau.modeset=0 i915.disable_power_well=0 video.use_native_backlight=1
vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007a7ebfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a7ec000-0x000000007a86bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a86c000-0x000000007a87dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007a87e000-0x000000007b5acfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b5ad000-0x000000007b9e1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b9e2000-0x000000007ba3cfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ba3d000-0x000000007bc08fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bc09000-0x000000007bfc4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7a86f000 ACPI 2.0=0x7a86f000 SMBIOS=0xf05b0
MPS=0xfd950
[ 0.000000] efi: mem00: type=3, attr=0xf,
range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf,
range=[0x0000000000008000-0x000000000003e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf,
range=[0x000000000003e000-0x000000000003f000) (0MB)
[ 0.000000] efi: mem03: type=10, attr=0xf,
range=[0x000000000003f000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf,
range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf,
range=[0x0000000000100000-0x0000000001512000) (20MB)
[ 0.000000] efi: mem06: type=7, attr=0xf,
range=[0x0000000001512000-0x0000000002000000) (10MB)
[ 0.000000] efi: mem07: type=2, attr=0xf,
range=[0x0000000002000000-0x0000000003412000) (20MB)
[ 0.000000] efi: mem08: type=7, attr=0xf,
range=[0x0000000003412000-0x0000000022f9b000) (507MB)
[ 0.000000] efi: mem09: type=2, attr=0xf,
range=[0x0000000022f9b000-0x0000000040000000) (464MB)
[ 0.000000] efi: mem10: type=0, attr=0xf,
range=[0x0000000040000000-0x0000000040200000) (2MB)
[ 0.000000] efi: mem11: type=7, attr=0xf,
range=[0x0000000040200000-0x000000005c000000) (446MB)
[ 0.000000] efi: mem12: type=4, attr=0xf,
range=[0x000000005c000000-0x000000005c020000) (0MB)
[ 0.000000] efi: mem13: type=7, attr=0xf,
range=[0x000000005c020000-0x0000000074258000) (386MB)
[ 0.000000] efi: mem14: type=1, attr=0xf,
range=[0x0000000074258000-0x0000000074345000) (0MB)
[ 0.000000] efi: mem15: type=2, attr=0xf,
range=[0x0000000074345000-0x0000000074435000) (0MB)
[ 0.000000] efi: mem16: type=1, attr=0xf,
range=[0x0000000074435000-0x0000000074542000) (1MB)
[ 0.000000] efi: mem17: type=4, attr=0xf,
range=[0x0000000074542000-0x000000007a1ec000) (92MB)
[ 0.000000] efi: mem18: type=7, attr=0xf,
range=[0x000000007a1ec000-0x000000007a447000) (2MB)
[ 0.000000] efi: mem19: type=2, attr=0xf,
range=[0x000000007a447000-0x000000007a451000) (0MB)
[ 0.000000] efi: mem20: type=3, attr=0xf,
range=[0x000000007a451000-0x000000007a7ec000) (3MB)
[ 0.000000] efi: mem21: type=0, attr=0xf,
range=[0x000000007a7ec000-0x000000007a86c000) (0MB)
[ 0.000000] efi: mem22: type=9, attr=0xf,
range=[0x000000007a86c000-0x000000007a87e000) (0MB)
[ 0.000000] efi: mem23: type=10, attr=0xf,
range=[0x000000007a87e000-0x000000007b5ad000) (13MB)
[ 0.000000] efi: mem24: type=6, attr=0x800000000000000f,
range=[0x000000007b5ad000-0x000000007b9e2000) (4MB)
[ 0.000000] efi: mem25: type=5, attr=0x800000000000000f,
range=[0x000000007b9e2000-0x000000007ba3d000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf,
range=[0x000000007ba3d000-0x000000007bc09000) (1MB)
[ 0.000000] efi: mem27: type=6, attr=0x800000000000000f,
range=[0x000000007bc09000-0x000000007bfc5000) (3MB)
[ 0.000000] efi: mem28: type=4, attr=0xf,
range=[0x000000007bfc5000-0x000000007c000000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf,
range=[0x0000000100000000-0x0000000180000000) (2048MB)
[ 0.000000] efi: mem30: type=11, attr=0x8000000000000001,
range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem31: type=11, attr=0x8000000000000001,
range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem32: type=11, attr=0x8000000000000001,
range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[ 0.000000] efi: mem33: type=11, attr=0x8000000000000001,
range=[0x00000000ff980000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 15-3552/01M0MH, BIOS 4.0.9 06/02/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07C800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 100000000 mask F80000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 1992MB, range: 8MB, type UC
[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] total RAM covered: 4040M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose
cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 1992MB, range: 8MB, type UC
[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 2GB, type WB
[ 0.000000] e820: update [mem 0x7c800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at
[ffff8800000fdae0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02ff0000, 0x02ff0fff] PGTABLE
[ 0.000000] BRK [0x02ff1000, 0x02ff1fff] PGTABLE
[ 0.000000] BRK [0x02ff2000, 0x02ff2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 2M
[ 0.000000] BRK [0x02ff3000, 0x02ff3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 2M
[ 0.000000] BRK [0x02ff4000, 0x02ff4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0x7a7ebfff]
[ 0.000000] [mem 0x40200000-0x7a5fffff] page 2M
[ 0.000000] [mem 0x7a600000-0x7a7ebfff] page 4k
[ 0.000000] BRK [0x02ff5000, 0x02ff5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7ba3d000-0x7bc08fff]
[ 0.000000] [mem 0x7ba3d000-0x7bc08fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7bfc5000-0x7bffffff]
[ 0.000000] [mem 0x7bfc5000-0x7bffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3434c000-0x3619dfff]
[ 0.000000] ACPI: RSDP 000000007a86f000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 000000007a86f0a0 0000C4 (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: FACP 000000007a879618 00010C (v05 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: DSDT 000000007a86f1f8 00A41B (v02 DELL WN09 01072009
INTL 20120913)
[ 0.000000] ACPI: FACS 000000007b5aae80 000040
[ 0.000000] ACPI: APIC 000000007a879728 000068 (v03 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: FPDT 000000007a879790 000044 (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: FIDT 000000007a8797d8 00009C (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: MCFG 000000007a879878 00003C (v01 DELL WN09 01072009
MSFT 00000097)
[ 0.000000] ACPI: BOOT 000000007a8798b8 000028 (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: SLIC 000000007a8798e0 000176 (v01 ALWARE ALIENWRE 01072009
AMI 00010013)
[ 0.000000] ACPI: SLIC 000000007a879a58 000176 (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: HPET 000000007a879bd0 000038 (v01 DELL WN09 01072009
AMI. 00000006)
[ 0.000000] ACPI: SSDT 000000007a879c08 000763 (v01 PmRef CpuPm 00003000
INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007a87a370 000290 (v01 PmRef Cpu0Tst 00003000
INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007a87a600 00017A (v01 PmRef ApTst 00003000
INTL 20061109)
[ 0.000000] ACPI: UEFI 000000007a87a780 000042 (v01 DELL WN09 00000000
00000000)
[ 0.000000] ACPI: SSDT 000000007a87a7c8 000427 (v01 Intel_ Tpm2Tabl 00001000
INTL 20061109)
[ 0.000000] ACPI: TPM2 000000007a87abf0 000034 (v03 00000000
00000000)
[ 0.000000] ACPI: LPIT 000000007a87ac28 000104 (v01 DELL WN09 00000005
MSFT 0100000D)
[ 0.000000] ACPI: BGRT 000000007a87ad30 000038 (v01 DELL WN09 01072009
AMI 00010013)
[ 0.000000] ACPI: CSRT 000000007a87ad68 00014C (v00 INTEL LANFORDC 00000005
MSFT 0100000D)
[ 0.000000] ACPI: SSDT 000000007a87aeb8 000545 (v01 CpuDpf CpuDptf 00001000
INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007a87b400 001ED7 (v01 DptfTb DptfTab 00001000
INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x17fff7000-0x17fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD ->
[ffff88017b600000-ffff88017f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0003efff]
[ 0.000000] node 0: [mem 0x00040000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x7a7ebfff]
[ 0.000000] node 0: [mem 0x7ba3d000-0x7bc08fff]
[ 0.000000] node 0: [mem 0x7bfc5000-0x7bffffff]
[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1025937
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7776 pages used for memmap
[ 0.000000] DMA32 zone: 497651 pages, LIFO batch:31
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 131
[ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a7ec000-0x7a86bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a86c000-0x7a87dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a87e000-0x7b5acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b5ad000-0x7b9e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b9e2000-0x7ba3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bc09000-0x7bfc4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0x7c000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88017fc00000 s84096 r8192
d22400 u1048576
[ 0.000000] pcpu-alloc: s84096 r8192 d22400 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1009879
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-167-generic
root=UUID=0573c2b5-3e43-4300-8e2b-a22c7a96c95e ro quiet splash radeon.modeset=0
nouveau.modeset=0 i915.disable_power_well=0 video.use_native_backlight=1
vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3823368K/4103748K available (7503K kernel code, 1163K
rwdata, 3440K rodata, 1376K init, 1448K bss, 280380K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 1599.718 MHz processor
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3199.43 BogoMIPS (lpj=6398872)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.002685] Security Framework initialized
[ 0.002720] AppArmor: AppArmor initialized
[ 0.002725] Yama: becoming mindful.
[ 0.003420] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.005782] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006835] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006853] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.007329] Initializing cgroup subsys memory
[ 0.007347] Initializing cgroup subsys devices
[ 0.007354] Initializing cgroup subsys freezer
[ 0.007358] Initializing cgroup subsys blkio
[ 0.007362] Initializing cgroup subsys perf_event
[ 0.007368] Initializing cgroup subsys hugetlb
[ 0.007411] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007411] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012883] mce: CPU supports 6 MCE banks
[ 0.012896] CPU0: Thermal monitoring handled by SMI
[ 0.012905] process: using mwait in idle threads
[ 0.012915] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.012915] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 0
[ 0.012924] Spectre V2 : Mitigation: Full generic retpoline
[ 0.012926] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.013298] Freeing SMP alternatives memory: 32K (ffffffff81e7c000 -
ffffffff81e84000)
[ 0.015098] ACPI: Core revision 20131115
[ 0.034528] ACPI: All ACPI Tables successfully acquired
[ 0.042720] ftrace: allocating 28753 entries in 113 pages
[ 0.075622] smpboot: Max logical packages: 1
[ 0.075632] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.076916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.116602] smpboot: CPU0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz (fam:
06, model: 4c, stepping: 03)
[ 0.116622] TSC deadline timer enabled
[ 0.116649] Performance Events: PEBS fmt2+, generic architected perfmon,
full-width counters, Intel PMU driver.
[ 0.116662] ... version: 3
[ 0.116665] ... bit width: 40
[ 0.116668] ... generic registers: 2
[ 0.116671] ... value mask: 000000ffffffffff
[ 0.116674] ... max period: 000000ffffffffff
[ 0.116676] ... fixed-purpose events: 3
[ 0.116679] ... event mask: 0000000700000003
[ 0.120871] x86: Booting SMP configuration:
[ 0.137255] CPU1: Thermal monitoring handled by SMI
[ 0.120880] .... node #0, CPUs: #1
[ 0.139363] x86: Booted up 1 node, 2 CPUs
[ 0.139371] smpboot: Total of 2 processors activated (6398.87 BogoMIPS)
[ 0.139547] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.140519] devtmpfs: initialized
[ 0.149220] EVM: security.selinux
[ 0.149226] EVM: security.SMACK64
[ 0.149228] EVM: security.ima
[ 0.149233] EVM: security.capability
[ 0.149406] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff]
(4096 bytes)
[ 0.149411] PM: Registering ACPI NVS region [mem 0x7a87e000-0x7b5acfff]
(13824000 bytes)
[ 0.152367] pinctrl core: initialized pinctrl subsystem
[ 0.152542] regulator-dummy: no parameters
[ 0.152610] RTC time: 7:17:21, date: 04/02/19
[ 0.152729] NET: Registered protocol family 16
[ 0.153111] cpuidle: using governor ladder
[ 0.153116] cpuidle: using governor menu
[ 0.153292] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.153299] ACPI: bus type PCI registered
[ 0.153304] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.153445] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153452] PCI: not using MMCONFIG
[ 0.153457] PCI: Using configuration type 1 for base access
[ 0.153473] dmi type 0xB1 record - unknown flag
[ 0.155882] bio: create slab <bio-0> at 0
[ 0.156304] ACPI: Added _OSI(Module Device)
[ 0.156309] ACPI: Added _OSI(Processor Device)
[ 0.156312] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.174126] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.180812] ACPI: SSDT 000000007a81a618 00056E (v01 PmRef Cpu0Ist 00003000
INTL 20061109)
[ 0.181846] ACPI: Dynamic OEM Table Load:
[ 0.181852] ACPI: SSDT (null) 00056E (v01 PmRef Cpu0Ist 00003000
INTL 20061109)
[ 0.182126] ACPI: SSDT 000000007a81ac18 0003A5 (v01 PmRef Cpu0Cst 00003001
INTL 20061109)
[ 0.183140] ACPI: Dynamic OEM Table Load:
[ 0.183145] ACPI: SSDT (null) 0003A5 (v01 PmRef Cpu0Cst 00003001
INTL 20061109)
[ 0.184071] ACPI: SSDT 000000007a81be18 00015F (v01 PmRef ApIst 00003000
INTL 20061109)
[ 0.185129] ACPI: Dynamic OEM Table Load:
[ 0.185135] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000
INTL 20061109)
[ 0.187721] ACPI: SSDT 000000007a81cf18 00008D (v01 PmRef ApCst 00003000
INTL 20061109)
[ 0.188740] ACPI: Dynamic OEM Table Load:
[ 0.188746] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000
INTL 20061109)
[ 0.192229] ACPI: Interpreter enabled
[ 0.192248] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20131115/hwxface-580)
[ 0.192263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20131115/hwxface-580)
[ 0.192302] ACPI: (supports S0 S3 S4 S5)
[ 0.192306] ACPI: Using IOAPIC for interrupt routing
[ 0.192373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.194370] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.229899] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.230323] ACPI: No dock devices found.
[ 0.234395] ACPI: Power Resource [USBC] (on)
[ 0.252059] ACPI: Power Resource [FN00] (off)
[ 0.253618] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.253635] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.253732] \_SB_.PCI0:_OSC invalid UUID
[ 0.253737] _OSC request data:1 1f 0
[ 0.253749] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.254843] PCI host bridge to bus 0000:00
[ 0.254851] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.254859] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.254864] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.254868] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.254873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.254878] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.254883] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.254888] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
[ 0.254904] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.255145] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.255183] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.255203] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit
pref]
[ 0.255215] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.255476] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.255505] pci 0000:00:0b.0: reg 0x10: [mem 0x9131f000-0x9131ffff 64bit]
[ 0.255807] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.255878] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.255894] pci 0000:00:13.0: reg 0x24: [mem 0x9131c000-0x9131c7ff]
[ 0.255966] pci 0000:00:13.0: PME# supported from D3hot
[ 0.256178] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.256217] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[ 0.256316] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.256455] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.256541] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.256571] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[ 0.256586] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[ 0.256685] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.256905] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.256946] pci 0000:00:1b.0: reg 0x10: [mem 0x91310000-0x91313fff 64bit]
[ 0.257064] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.257213] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.257300] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.257416] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.257568] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.257656] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.257990] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.258051] pci 0000:00:1f.3: reg 0x10: [mem 0x91318000-0x9131801f]
[ 0.258173] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.258654] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
[ 0.258686] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x9127ffff 64bit]
[ 0.258740] pci 0000:01:00.0: reg 0x30: [mem 0x91280000-0x9128ffff pref]
[ 0.258818] pci 0000:01:00.0: supports D1 D2
[ 0.258823] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.258882] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.264913] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264928] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.266484] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.266638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.266801] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.266952] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.267105] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.267259] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.267414] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.267567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15)
*0, disabled.
[ 0.269004] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.269029] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.269220] Found 1 acpi root devices
[ 0.269703] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.269711] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.269718] vgaarb: loaded
[ 0.269724] vgaarb: bridge control possible 0000:00:02.0
[ 0.270140] SCSI subsystem initialized
[ 0.270231] libata version 3.00 loaded.
[ 0.270278] ACPI: bus type USB registered
[ 0.270323] usbcore: registered new interface driver usbfs
[ 0.270344] usbcore: registered new interface driver hub
[ 0.270418] usbcore: registered new device driver usb
[ 0.270738] PCI: Using ACPI for IRQ routing
[ 0.281868] PCI: pci_cache_line_size set to 64 bytes
[ 0.281938] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 0.281944] e820: reserve RAM buffer [mem 0x7a7ec000-0x7bffffff]
[ 0.281948] e820: reserve RAM buffer [mem 0x7bc09000-0x7bffffff]
[ 0.282154] NetLabel: Initializing
[ 0.282160] NetLabel: domain hash size = 128
[ 0.282162] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.282188] NetLabel: unlabeled traffic allowed by default
[ 0.282399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.282408] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.284486] Switched to clocksource hpet
[ 0.296030] AppArmor: AppArmor Filesystem Enabled
[ 0.296105] pnp: PnP ACPI init
[ 0.296137] ACPI: bus type PNP registered
[ 0.296265] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296407] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.296853] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.296971] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.296978] system 00:03: [io 0x0400-0x047f] has been reserved
[ 0.296983] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 0.296991] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297118] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.297228] pnp 00:05: Plug and Play ACPI device, IDs SYN060c PNP0f13
(active)
[ 0.297342] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.297352] system 00:06: [mem 0xfe900000-0xfe902fff] has been reserved
[ 0.297359] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297687] pnp 00:07: unknown resource type 19 in _CRS
[ 0.297693] pnp 00:07: can't evaluate _CRS: 1
[ 0.297741] pnp 00:07: Plug and Play ACPI device, IDs DLL06ac PNP0c50
(active)
[ 0.298821] system 00:08: [mem 0x9131d000-0x9131dfff] has been reserved
[ 0.298829] system 00:08: [mem 0x9131b000-0x9131bfff] has been reserved
[ 0.298834] system 00:08: [mem 0x91319000-0x91319fff] has been reserved
[ 0.298841] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298964] system 00:09: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.298971] system 00:09: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.298976] system 00:09: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.298982] system 00:09: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.298987] system 00:09: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.298993] system 00:09: [mem 0xfed08000-0xfed09fff] could not be reserved
[ 0.298999] system 00:09: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.299004] system 00:09: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.299010] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.299016] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299662] pnp 00:0a: Plug and Play ACPI device, IDs INT33ff (active)
[ 0.300021] pnp: PnP ACPI: found 11 devices
[ 0.300028] ACPI: bus type PNP unregistered
[ 0.311037] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.311055] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff]
[ 0.311075] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.311080] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.311085] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.311090] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.311094] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.311099] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.311104] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
[ 0.311109] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[ 0.311186] NET: Registered protocol family 2
[ 0.311671] TCP established hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.311860] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.312059] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.312131] TCP: reno registered
[ 0.312160] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.312209] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.312406] NET: Registered protocol family 1
[ 0.312441] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.312984] PCI: CLS 0 bytes, default 64
[ 0.313163] Trying to unpack rootfs image as initramfs...
[ 1.290951] Freeing initrd memory: 31048K (ffff88003434c000 -
ffff88003619e000)
[ 1.290965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.290971] software IO TLB [mem 0x70542000-0x74542000] (64MB) mapped at
[ffff880070542000-ffff880074541fff]
[ 1.291189] Simple Boot Flag at 0x47 set to 0x1
[ 1.291424] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x34b
[ 1.291443] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x34b
[ 1.291552] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.291558] Scanning for low memory corruption every 60 seconds
[ 1.292150] Initialise system trusted keyring
[ 1.292287] audit: initializing netlink socket (disabled)
[ 1.292315] type=2000 audit(1554189442.288:1): initialized
[ 1.346412] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.349321] zbud: loaded
[ 1.349752] VFS: Disk quotas dquot_6.5.2
[ 1.349863] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.350917] fuse init (API version 7.22)
[ 1.351097] msgmni has been set to 7725
[ 1.351221] Key type big_key registered
[ 1.352101] Key type asymmetric registered
[ 1.352108] Asymmetric key parser 'x509' registered
[ 1.352187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 1.352273] io scheduler noop registered
[ 1.352279] io scheduler deadline registered (default)
[ 1.352332] io scheduler cfq registered
[ 1.352877] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.352916] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.353018] efifb: probing for efifb
[ 1.353771] efifb: framebuffer at 0x80000000, mapped to 0xffffc90010780000,
using 4160k, total 4160k
[ 1.353776] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.353778] efifb: scrolling: redraw
[ 1.353783] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.362409] Console: switching to colour frame buffer device 170x48
[ 1.370776] fb0: EFI VGA frame buffer device
[ 1.370808] intel_idle: does not run on family 6 model 76
[ 1.370823] ipmi message handler version 39.2
[ 1.370941] ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
[ 1.371071] ACPI: AC Adapter [AC] (on-line)
[ 1.371379] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.373699] ACPI: Lid Switch [LID0]
[ 1.373784] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.373793] ACPI: Power Button [PWRB]
[ 1.373874] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.373881] ACPI: Sleep Button [SLPB]
[ 1.373963] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.373969] ACPI: Power Button [PWRF]
[ 1.374149] ACPI: Fan [FAN0] (off)
[ 1.377325] Monitor-Mwait will be used to enter C-1 state
[ 1.421345] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.421351] ACPI: Thermal Zone [THM] (31 C)
[ 1.422154] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.422160] ACPI: Thermal Zone [TZ01] (31 C)
[ 1.422232] GHES: HEST is not enabled!
[ 1.422433] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.442911] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is
a 16550A
[ 1.445448] ACPI: Deprecated procfs I/F for battery is loaded, please retry
with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.445461] ACPI: Battery Slot [BAT0] (battery present)
[ 1.445711] Linux agpgart interface v0.103
[ 1.448813] brd: module loaded
[ 1.450425] loop: module loaded
[ 1.451278] libphy: Fixed MDIO Bus: probed
[ 1.451484] tun: Universal TUN/TAP device driver, 1.6
[ 1.451488] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 1.451593] PPP generic driver version 2.4.2
[ 1.451685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.451695] ehci-pci: EHCI PCI platform driver
[ 1.451722] ehci-platform: EHCI generic platform driver
[ 1.451739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.451744] ohci-pci: OHCI PCI platform driver
[ 1.451764] ohci-platform: OHCI generic platform driver
[ 1.451781] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.452118] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.452133] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 1.453342] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.453400] xhci_hcd 0000:00:14.0: irq 131 for MSI/MSI-X
[ 1.453589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.453596] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.453600] usb usb1: Product: xHCI Host Controller
[ 1.453605] usb usb1: Manufacturer: Linux 3.13.0-167-generic xhci_hcd
[ 1.453609] usb usb1: SerialNumber: 0000:00:14.0
[ 1.453878] hub 1-0:1.0: USB hub found
[ 1.453913] hub 1-0:1.0: 7 ports detected
[ 1.456280] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.456294] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 1.456409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.456415] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.456420] usb usb2: Product: xHCI Host Controller
[ 1.456424] usb usb2: Manufacturer: Linux 3.13.0-167-generic xhci_hcd
[ 1.456429] usb usb2: SerialNumber: 0000:00:14.0
[ 1.456695] hub 2-0:1.0: USB hub found
[ 1.456723] hub 2-0:1.0: 6 ports detected
[ 1.464648] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.469015] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.469030] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.469317] mousedev: PS/2 mouse device common for all mice
[ 1.469765] rtc_cmos 00:00: RTC can wake from S4
[ 1.470020] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.470078] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet
irqs
[ 1.470259] device-mapper: uevent: version 1.0.3
[ 1.470432] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-de...@redhat.com
[ 1.470447] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.470452] EFI Variables Facility v0.08 2004-May-17
[ 1.478884] TCP: cubic registered
[ 1.479105] NET: Registered protocol family 10
[ 1.479490] NET: Registered protocol family 17
[ 1.479518] Key type dns_resolver registered
[ 1.480076] Loading compiled-in X.509 certificates
[ 1.482508] Loaded X.509 cert 'Magrathea: Glacier signing key:
7f31a5d3f06466a18e35a132be01bb1d196ea0c8'
[ 1.482558] registered taskstats version 1
[ 1.489314] Key type trusted registered
[ 1.492621] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.503613] Key type encrypted registered
[ 1.503626] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.503630] IMA: No TPM chip found, activating TPM-bypass!
[ 1.504074] regulator-dummy: disabling
[ 1.504189] Magic number: 15:595:267
[ 1.504268] clk-lpt clk-lpt: hash matches
[ 1.504396] rtc_cmos 00:00: setting system clock to 2019-04-02 07:17:23 UTC
(1554189443)
[ 1.506117] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.506121] EDD information not available.
[ 1.506211] PM: Hibernation image not present or could not be loaded.
[ 1.508235] Freeing unused kernel memory: 1376K (ffffffff81d24000 -
ffffffff81e7c000)
[ 1.508243] Write protecting the kernel read-only data: 12288k
[ 1.509036] Freeing unused kernel memory: 672K (ffff880002758000 -
ffff880002800000)
[ 1.512267] Freeing unused kernel memory: 656K (ffff880002b5c000 -
ffff880002c00000)
[ 1.542257] systemd-udevd[103]: starting version 204
[ 1.595839] sdhci: Secure Digital Host Controller Interface driver
[ 1.595846] sdhci: Copyright(c) Pierre Ossman
[ 1.611116] sdhci-acpi 80860F14:00: dummy supplies not allowed
[ 1.611123] mmc0: no vqmmc regulator found
[ 1.611127] sdhci-acpi 80860F14:00: dummy supplies not allowed
[ 1.611129] mmc0: no vmmc regulator found
[ 1.614577] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 1.614888] ahci 0000:00:13.0: version 3.0
[ 1.615131] ahci 0000:00:13.0: irq 132 for MSI/MSI-X
[ 1.615208] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3
impl SATA mode
[ 1.615214] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio
slum part deso sadm sds apst
[ 1.616820] scsi0 : ahci
[ 1.617492] wmi: Mapper loaded
[ 1.617714] scsi1 : ahci
[ 1.617807] ata1: SATA max UDMA/133 abar m2048@0x9131c000 port 0x9131c100
irq 132
[ 1.617813] ata2: SATA max UDMA/133 abar m2048@0x9131c000 port 0x9131c180
irq 132
[ 1.764475] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.783397] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 1.783402] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.783405] usb 1-2: Product: USB2.0 Hub
[ 1.784020] hub 1-2:1.0: USB hub found
[ 1.784318] hub 1-2:1.0: 4 ports detected
[ 1.936466] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.944464] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.952462] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.991538] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P2D, max UDMA/100
[ 1.991543] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.992345] usb 1-5: New USB device found, idVendor=064e, idProduct=9209
[ 1.992350] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.992353] usb 1-5: Product: Integrated_Webcam_HD
[ 1.992357] usb 1-5: Manufacturer: SuYin
[ 1.992360] usb 1-5: SerialNumber: HF1026-T838-HN01-REV4261
[ 1.993403] ata1.00: configured for UDMA/100
[ 1.993610] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 AM0P
PQ: 0 ANSI: 5
[ 1.993840] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.994003] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 1.994008] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.994134] sd 0:0:0:0: [sda] Write Protect is off
[ 1.994139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.994194] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.064455] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[ 2.081774] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005
[ 2.081779] usb 1-2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.112136] sda: sda1 sda2 sda3 sda4
[ 2.112773] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.152469] usb 1-2.2: new high-speed USB device number 5 using xhci_hcd
[ 2.168815] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=0129
[ 2.168820] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.168824] usb 1-2.2: Product: USB2.0-CRW
[ 2.168828] usb 1-2.2: Manufacturer: Generic
[ 2.168831] usb 1-2.2: SerialNumber: 20100201396000000
[ 2.288470] tsc: Refined TSC clocksource calibration: 1599.948 MHz
[ 2.489195] psmouse serio1: synaptics: queried max coordinates: x [..5662],
y [..4700]
[ 2.516778] psmouse serio1: synaptics: queried min coordinates: x [1322..],
y [1240..]
[ 2.571813] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id:
0x1e2a1, caps: 0xf40123/0x840300/0x12e800, board id: 3096, fw id: 2019836
[ 2.605693] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 3.288547] Switched to clocksource tsc
[ 3.964375] raid6: sse2x1 3600 MB/s
[ 4.032368] raid6: sse2x2 3143 MB/s
[ 4.100363] raid6: sse2x4 4434 MB/s
[ 4.100366] raid6: using algorithm sse2x4 (4434 MB/s)
[ 4.100368] raid6: using ssse3x2 recovery algorithm
[ 4.102580] xor: measuring software checksum speed
[ 4.140360] prefetch64-sse: 6569.000 MB/sec
[ 4.180358] generic_sse: 5973.000 MB/sec
[ 4.180361] xor: using function: prefetch64-sse (6569.000 MB/sec)
[ 4.205756] bio: create slab <bio-1> at 1
[ 4.206100] Btrfs loaded
[ 4.595436] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.996772] random: nonblocking pool is initialized
[ 15.848631] Adding 8206332k swap on /dev/sda4. Priority:-1 extents:1
across:8206332k FS
[ 16.216383] systemd-udevd[311]: starting version 204
[ 16.485840] lp: driver loaded but no devices found
[ 16.542447] ppdev: user-space parallel port driver
[ 16.596617] hidraw: raw HID events driver (C) Jiri Kosina
[ 16.647332] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 16.741254] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.921504] cfg80211: Calling CRDA to update world regulatory domain
[ 17.018772] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 17.123051] ath9k 0000:01:00.0: enabling device (0000 -> 0002)
[ 17.123330] ath: phy0: WB335 1-ANT card detected
[ 17.123333] ath: phy0: Set BT/WLAN RX diversity capability
[ 17.131361] ath: phy0: Enable LNA combining
[ 17.162060] ath: phy0: ASPM enabled: 0x42
[ 17.162069] ath: EEPROM regdomain: 0x6c
[ 17.162072] ath: EEPROM indicates we should expect a direct regpair map
[ 17.162077] ath: Country alpha2 being used: 00
[ 17.162079] ath: Regpair used: 0x6c
[ 17.181590] type=1400 audit(1554189459.176:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=444
comm="apparmor_parser"
[ 17.181605] type=1400 audit(1554189459.176:3): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444
comm="apparmor_parser"
[ 17.181614] type=1400 audit(1554189459.176:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
[ 17.228399] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.229416] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90011080000,
irq=16
[ 17.707958] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 17.937526] cfg80211: World regulatory domain updated:
[ 17.937536] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 17.937540] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 17.937543] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 17.937546] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 17.937549] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 17.937551] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 18.421434] init: failsafe main process (537) killed by TERM signal
[ 18.474716] Linux video capture interface: v2.00
[ 18.542711] Bluetooth: Core ver 2.17
[ 18.542760] NET: Registered protocol family 31
[ 18.542763] Bluetooth: HCI device and connection manager initialized
[ 18.542779] Bluetooth: HCI socket layer initialized
[ 18.542783] Bluetooth: L2CAP socket layer initialized
[ 18.542792] Bluetooth: SCO socket layer initialized
[ 18.577076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.577083] Bluetooth: BNEP filters: protocol multicast
[ 18.577099] Bluetooth: BNEP socket layer initialized
[ 18.624669] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (064e:9209)
[ 18.630964] input: Integrated_Webcam_HD as
/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9
[ 18.632632] usbcore: registered new interface driver uvcvideo
[ 18.632639] USB Video Class driver (1.1.1)
[ 18.688388] Bluetooth: RFCOMM TTY layer initialized
[ 18.688415] Bluetooth: RFCOMM socket layer initialized
[ 18.688433] Bluetooth: RFCOMM ver 1.11
[ 18.958591] type=1400 audit(1554189460.952:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=786 comm="apparmor_parser"
[ 18.958608] type=1400 audit(1554189460.952:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=786
comm="apparmor_parser"
[ 19.005005] usbcore: registered new interface driver btusb
[ 19.010114] rts5139: module is from the staging directory, the quality is
unknown, you have been warned.
[ 19.087084] scsi2 : SCSI emulation for RTS5139 USB card reader
[ 19.087560] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00
PQ: 0 ANSI: 0 CCS
[ 19.088822] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 19.093726] usbcore: registered new interface driver rts5139
[ 19.189106] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 19.390946] init: cups main process (794) killed by HUP signal
[ 19.390977] init: cups main process ended, respawning
[ 19.466921] type=1400 audit(1554189461.460:7): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=887
comm="apparmor_parser"
[ 19.466939] type=1400 audit(1554189461.460:8): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887
comm="apparmor_parser"
[ 19.466948] type=1400 audit(1554189461.460:9): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
[ 19.482427] type=1400 audit(1554189461.476:10): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/lightdm/lightdm-guest-session" pid=886 comm="apparmor_parser"
[ 19.482445] type=1400 audit(1554189461.476:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="chromium" pid=886
comm="apparmor_parser"
[ 19.547989] usbcore: registered new interface driver ath3k
[ 19.573753] usb 1-2.1: USB disconnect, device number 4
[ 19.633427] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.797017] usb 1-2.1: new full-speed USB device number 6 using xhci_hcd
[ 19.817431] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=e005
[ 19.817437] usb 1-2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 20.369154] init: alsa-restore main process (1028) terminated with status 19
[ 21.075539] hdaps: supported laptop not found!
[ 21.075546] hdaps: driver init failed (ret=-19)!
[ 21.304034] Non-volatile memory driver v1.3
[ 22.081334] init: plymouth-upstart-bridge main process ended, respawning
[ 22.098497] init: plymouth-upstart-bridge main process (1336) terminated
with status 1
[ 22.098531] init: plymouth-upstart-bridge main process ended, respawning
[ 22.221717] init: plymouth-stop pre-start process (1357) terminated with
status 1
[ 49.195881] audit_printk_skb: 48 callbacks suppressed
[ 49.195888] type=1400 audit(1554189491.192:28): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=1667 comm="apparmor_parser"
[ 49.195902] type=1400 audit(1554189491.192:29): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=1667 comm="apparmor_parser"
[ 660.110221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 683.890465] wlan0: authenticate with 00:34:da:26:2e:92
[ 683.906003] wlan0: send auth to 00:34:da:26:2e:92 (try 1/3)
[ 683.908583] wlan0: authenticated
[ 683.910350] wlan0: associate with 00:34:da:26:2e:92 (try 1/3)
[ 683.925361] wlan0: RX AssocResp from 00:34:da:26:2e:92 (capab=0x431 status=0
aid=1)
[ 683.925500] wlan0: associated
[ 683.925541] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 882.281135] wlan0: deauthenticated from 00:34:da:26:2e:92 (Reason: 2)
[ 882.332770] cfg80211: Calling CRDA to update world regulatory domain
[ 882.342532] cfg80211: World regulatory domain updated:
[ 882.342544] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 882.342548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 882.342551] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 882.342554] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 882.342557] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 882.342560] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 883.286056] wlan0: authenticate with 00:34:da:26:2e:92
[ 883.306849] wlan0: send auth to 00:34:da:26:2e:92 (try 1/3)
[ 883.422648] wlan0: send auth to 00:34:da:26:2e:92 (try 2/3)
[ 883.533196] wlan0: send auth to 00:34:da:26:2e:92 (try 3/3)
[ 883.649362] wlan0: authentication with 00:34:da:26:2e:92 timed out
[ 883.790077] type=1400 audit(1554190325.712:30): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=3110 comm="apparmor_parser"
[ 883.790100] type=1400 audit(1554190325.712:31): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=3110 comm="apparmor_parser"
[ 925.992944] wlan0: authenticate with 00:34:da:26:2e:92
[ 926.009243] wlan0: send auth to 00:34:da:26:2e:92 (try 1/3)
[ 926.012856] wlan0: authenticated
[ 926.018960] wlan0: associate with 00:34:da:26:2e:92 (try 1/3)
[ 926.035512] wlan0: RX AssocResp from 00:34:da:26:2e:92 (capab=0x431 status=0
aid=1)
[ 926.035591] wlan0: associated
[ 2493.551447] systemd-hostnamed[3721]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818275
Title:
Dell Inspiron 15-3552 PCI/internal sound card not detected
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1818275/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
