On 10/18/07, Vishal Rao <[EMAIL PROTECTED]> wrote: > > On 10/19/07, Mir Nazim <[EMAIL PROTECTED]> wrote: > > Could you please expad on it how you did it or link us up. > > Right now I'm running openSUSE, but the following can apply to Gutsy > I'm sure :-) > > I blacklisted the bcm43xx module and used ndiswrapper with the latest > WinXP 32bit driver (bcwl5.inf and bcwl5.sys) for my card which is a > model 4321. Gutsy bcm43xx model appears to works and it downloads some > firmware but it is not the latest and does not support 4321. I tried > getting latest fwcutter but it does not recognise the latest WinXP > driver so I resorted to ndiswrapper. See > http://www.suseforums.net/index.php?showtopic=39622 > > For the touchscreen (mine is an "eGalax" model) I found the following > links and used the "Mike.Christ" xorg.conf (attached in first link > below) for good calibration numbers. I wasn't able to run calibration > myself, wil need another weekend's work I guess. > > The difference I needed to get it working was to not add the "dummy" > device section and in the "ServerLayout" section I added [InputDevice > "touchscreen" "SendCoreEvents"] instead of [InputDevice "touchscreen" > "CorePointer"]. > > I copied the udev rule file also from the evtouch tar. My device is > now "/dev/input/evtouch_event" which points to the right > "/dev/input/event2" or whatever the eventX is with the current boot. > See > http://www.kellyandsopho.com/tiki/tiki-index.php?page=LinuxOnHpPaviliontx1000z > and http://stz-softwaretechnik.com/~ke/touchscreen/evtouch.html >
Vishal, Correct me if i'm wrong, You used a 32bit Driver on the 64bit machine? -- Jay "Impossible Is Nothing" http://www.amonks.in
-- ubuntu-in mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-in
