On 17/11/2016 12:56, Mike Hughes wrote:
> Anyone had any experience of coaxing one of these out of the cage, or helpful > hints and tips they can share? > > Cheers, > Mike They latch at the sides and the latch is unfortunately released by that eject handle. I've managed to get one out before with an old-school set of feeler gauges, select the thickest that will fit down the side of the module yet still slide in smoothly. Insert at each side until you feel a bit of resistance, push a little harder until it gives a little. At which point you _should_ be able to pull the module from the chassis. I'd recommend two sets so you can get both clips at once, cheap enough to try. Worth googling a picture of the module so you can see where the clips are and how far you're expecting to push the tool in before it should snag. Good luck! Matthew -- Technical Specialist IT Services PhusionIM Ltd
