"Tim Evans" <[EMAIL PROTECTED]> writes: > 14e4 is correct in both cases.
Vendor 14e4 is Broadcom, whose Linux support in general is notoriously poor. (They refuse to release programming specifications for their hardware.) > Also, FYI, I booted a Knoppix 3.3 CD on both machines and got the > same results as your image - the hardware is detected, it recognizes > that the link is up, but it fails to get a lease. Well, that suggests it is not my fault :-). This may be a lot to ask, but can you tell if the DHCP request is being sent at all? What if you bring up the network by hand with "ifconfig <IP-address>" ? Can you then use it to "ping"? The driver you are using is tg3.o, which is an attempt by open source authors to support these Broadcom chipsets. Broadcom themselves have a closed-source driver, but I am not sure it will work with the 2.6 kernel... You could also ask the Knoppix folks if they have any ideas. - Pat ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ unattended-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/unattended-devel
