Thanks fr the info, plenty of thread is exposed to get two more nuts on it. How this started was I've been re-wirein the bonding system. There was no continuity between the bolts on the same shaft log, so bonding one nut would not be protecting the plate in the water. Does this sound correct?
On Sun, Nov 22, 2009 at 7:18 PM, <[email protected]> wrote: > *Usually Uniflite left at least 3/4 inch of bolt exposed do not use vise > grips it will damage threads use two nuts above on the exposed thread and > tighten them together then use those nuts to hold the bolt while you tighten > the lower bolt then lock down the lower one with the second nut should be > two nuts on each bolt.* > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en -~----------~----~----~----~------~----~------~--~---
