If you can't see the little screw heads, they are under the plastic strip. They are small pan-head screws, either 3 or 4, I don't remember. If the plastic breaks, as mine did, I went to the home improvement store and bought some white plastic channel and ran it through my table saw to get the correct width. You will need to grasp the end of the existing strip at the opposite end of the track from the window and pull it out. Since the window weight will be resting on the strip it will not be easy. Before you try pulling it out, spray some silicone along the bottom of the glass. It should drip down on the track to help the strip slide out from under the window.
The glass will not lift out of the track. You will have to remove the plastic strip, screws and then slide the track with the glass in it, outboard. Gene
-- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
