Just connect all underwater metals with sz8 wire and terminate on a zinc plate mounted on the transom. (should be there already)
Thanks ________________________________ From: mvcompromise <[email protected]> To: UnifliteWorld <[email protected]> Sent: Sat, July 31, 2010 8:04:41 PM Subject: [UnifliteWorld] Bonding/Cathodic Protection Hi All, I have a 1982 42' DCMY with 6-71's and looking for some help on the bonding/cathodic protection. Does anybody have a drawing on the bonding? Before we bought the boat and over the years wires have come off thru hulls, rudder post, strut plates and we are noticing electrolysis starting to development. Any help would be apprecaited. Thanks, Red -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en. -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
