Connection... One way is to have the wire Clamped to the valve or the brass post/nipple.
I have several of my green bonding wires secured by the end of the wire simply clamped securely at the end. It does not look to have been tined at all just wire ends squished by the hose clamp. Recently the local bottom cleaning company I use came round and did a bonding survey for us. After all they change my zinks often enough. He had a fish that he drops in the water and searched all through my boat to reach all the points that need to be bonded. He found one that was low on the grounding connection strength. (and the one that has no grounding that I knew about.) So if you have anyone in your local harbor that has the tester. Ask them to do the review for that. Reassuring to have knowledge that all are hooked up and that the Zinc Plate is working. PS - in Marina Del Rey - I use S & K Dive service. Sincerely Keith L. <">< On Aug 4, 12:21 pm, "Perry & Cindi" <[email protected]> wrote: > I believe you have one large zinc in the center of your transom... -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
