Yeah, I missed that too. My CC37 has the same fitting - it's not quite triangular, more a rounded trapezoid - and that second smaller hose goes to a fitting just above the through-hull for overboard discharge. I've never understood what it's for.
That deck plate was the source of a major leak when I bought the boat - luckily I found & fixed it before it rotted the floor. The deck plate was cracked and I couldn't reach it from inside, so I managed to repair it & rebed it from the outside. When I replace it, I will have to get a stainless plate fabricated to cover the huge hole in the side deck, and mount a standard waste deck fitting in the plate. The whole mess is located outboard of a panel covered with wiring coming from the engine space, so I will have to attach a fresh piece of waste hose to the deck fitting before I install the whole thing in the side deck. Major PITA. For now it doesn't leak, so it's not very high on my priority list... On Fri, Jul 31, 2015 at 9:11 AM, David Oates <[email protected]> wrote: > Hey Bob, What are you forwarding to "him"? I didn't get the message in > between. > My 42 doesn't have a triangle plate, but it does have a small opening next > to the > waste pump-out port. I have been wondering what that small port is and > what it is for. It is connected to a hose that runs down like the waste > hose, but I don't know where it goes. One cannot force water down it and I > don't think I can pull anything out with the pump-out. > > DavidO > > ------------------------------ > *From:* Bob S <[email protected]> > *To:* [email protected] > *Sent:* Thursday, July 30, 2015 6:02 PM > *Subject:* Re: [UnifliteWorld] Jabsco Deckplate > > Thanks. I'll forward this to him........ > > > On Jul 30, 2015 4:53 PM, "Bob S" <[email protected]> wrote: > > Ran into a new owner of a 42' Uniflite and he asked me a question I > couldn't answer. I told him I'd ask on this site.He has a triangular Jabsco > deckplate for his waste management system with 2 holes labeled Waste and > "Par Waste" . Anyone know how these are to be used? > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/unifliteworld. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/unifliteworld. For more options, visit https://groups.google.com/d/optout.
