JackOfAll wrote: > KERNEL-WAND-3.0.35-CM34+ > > Terry/Pascal, > > Adrian sent me a patch for testing, (which may or may not work - it's > untested by either of us), to add support for 96k to the spdif output. > I've added support for 88k2, 176k4 and 192k to the patch. > While > 96k might not be supported by the TOSLINK transmitter anyway, > Pascal has added electrical out so perhaps > 96k is worth testing by > him. If you guys have a bunch of files at different sample rates and > could try 88k2 and 96k, great. Pascal, if you have media at 176k4 and > 192k, give it a go. > > The only testing I have done has not had an external DAC connected, but > I have verified by looking at /proc/asound/card1/pcm0p/sub0/hw_params > that it does detect the 88k2, 96k, 176k4, and 192k rates. Whether any > audio is actually being output may be another story........ > I have only limited hi res material available. Most of my library is 16 bit / 44,1kHz. However, I do have some 192 kHz files and some 96 kHz wav files. I tested all of them and these are the results: * 96 kHz material plays fine on both coax and toslink outputs. * 192 kHz files do play but they seem to be played at a very sloooooooow rate. I mean, it is like someone adjusted the pitch control to a very low setting.
------------------------------------------------------------------------ Pascal Hibon's Profile: http://forums.slimdevices.com/member.php?userid=7969 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
