sbp wrote: > > However, the I2S-stuff is probably not working as they previously was > taken via the P5 connector, and now they are located in the larger 40 > pin P1 connector, but I know that HiFiBerry have made changes to the > kernel, so that it will automatically select the correct pins for the > I2S. >
Steen, Can you please confirm which kernel branch you are using? When I looked, (quickly, I admit), that patch I pointed out to set up the I2S GPIO pins depending on B or B+ wasn't in the 3.15.y branch, only 3.12.y. Although I'm still running on Pidora, if you let me know which kernel branch you are building from, and any other patches you are applying, and post your kernel config..... I'll test the built kernel that results from building with your config, for I2S out, on both B and B+. Greg, Don't worry about the non-compile issue with the IQaudIO driver on 3.15. I see what is going on there. Easily fixable, to get the codec compiled. Whether it works or not, is another matter. LOL. (Good point made in the comments on that bug. These guys really must try and upstream their driver stuff at the earliest opportunity if they want to track mainline.) But it would be good to know exactly what branch Steen is using, before I go off at a tangent. For what I'm up to with Pidora, I was going to stick to the 3.12.y kernel branch. But as I'm currently testing I2S out of both B and B+ into a re-clocker, I will happily switch to whatever Steen is using to build kernels and try and make sure you guys wanting I2S out of the Pi with pico, have a working solution on both B and B+. ------------------------------------------------------------------------ JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
