mikeh49 wrote: > Thought I would report that SOA seems to work fine as a player on the > Pogoplug V4 Mobile. This device has a 700 MHz Kirkwood processor and > 128 MB RAM. I installed SOA over a clean base Arch linux installed per > this blog: > > http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html > > Then I did the manual install per the first post. Took about 15 minutes > to do the updates and build SOA. > > I have only basic needs, internet radio mostly; my music is 16 bit/44 > kHz FLAC. I've tested with 2 basic 16 bit DACs and no problems. I did > turn off MMAP as there were some crackles on initial use, and an ArchARM > forum recommended this. > > On restart of squeezelite, the SOA box does not reconnect to the server. > The server can see it, but it must be manually connected. I might have > a second server running on a test box, so perhaps that is the reason. I > have not seen this with my SB3 or VAMP. The server is 7.7.3. > > The beauty of this is that the Pogoplug Mobile is about $12 at the > moment. Arch is on a SD card, and there is a single USB port for the > DAC. Pretty inexpensive player that is unobtrusively small.
If you start squeezelite without specifying a server it can move to another server if the first server goes away. You should be able to use the web interface to move it back. ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=101624 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
