kingswindsor wrote:
> I have been trying to get Lirc set up with an Adafruit remote control
> that I have but I can't get PcP to see it. When I SSH into the Pi and
> run sudo mode2 -d /dev/lirc0 it does see the remote so I'm confident it
> is connected correctly. I have Jivelite enabled. The Adafruit config
> is at
> https://learn.adafruit.com/using-an-ir-remote-with-a-raspberry-pi-media-center/configure-and-test
>
> I have copied over the Adafruit configuration and put it in two files
> lircd.conf and lircrc which I have saved to /tmp and then pressed the
> 'Custom' button an re-booted. But the remote does not seem to do
> anything.
>
> I'm probably missing something obvious but I can't see it. Grateful for
> any advice.
I don't think you can use that conf file for Pcp the "KEY"'s are
different
My conf file for SB3 Remote
Code:
--------------------
#
# using lirc-0.9.0(userspace) on Sat Jan 30 17:21:19 2016
#
# contributed by Ralph Irving
#
# brand: Slim Devices
# model no. of remote control: Squeezebox3 Touch
# devices being controlled by this remote: Jivelite
#
begin remote
name Slim_Devices_Squeezebox3
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9100 4416
one 649 1593
zero 647 473
ptrail 649
pre_data_bits 16
pre_data 0x7689
gap 107995
min_repeat 1
suppress_repeat 6
toggle_bit_mask 0x0
begin codes
KEY_MINUS 0x00FF ## Volume-
KEY_EQUAL 0x807F ## Volume+
KEY_POWER 0x40BF ## Power
KEY_Z 0xC03F ## Rewind
KEY_C 0x20DF ## Pause
KEY_B 0xA05F ## Forward
KEY_A 0x609F ## Add
KEY_P 0x10EF ## Play
KEY_UP 0xE01F ## Up
KEY_LEFT 0x906F ## Left
KEY_RIGHT 0xD02F ## Right
KEY_DOWN 0xB04F ## Down
KEY_1 0xF00F ## 1
KEY_2 0x08F7 ## 2
KEY_3 0x8877 ## 3
KEY_4 0x48B7 ## 4
KEY_5 0xC837 ## 5
KEY_6 0x28D7 ## 6
KEY_7 0xA857 ## 7
KEY_8 0x6897 ## 8
KEY_9 0xE817 ## 9
KEY_0 0x9867 ## 0
KEY_F 0x18E7 ## Favourites
KEY_F 0xE21D ## Touch:FAVOURITES
KEY_SLASH 0x58A7 ## Search
KEY_SLASH 0x629D ## Touch:SEARCH
KEY_COMMA 0xD827 ## Shuffle
KEY_DOT 0x38C7 ## Repeat
KEY_ESC 0xB847 ## Sleep (escape)
KEY_LEFTBRACE 0x7887 ## NowPlaying
KEY_LEFTBRACE 0xA25D ## Touch:NOW PLAYING
KEY_G 0xF807 ## Size (stop)
KEY_SEMICOLON 0x708F ## Browse
KEY_GRAVE 0x04FB ## Brightness (playlists)
KEY_H 0x22DD ## Touch:HOME
end codes
end remote
--------------------
I think you'll need to use irrecord to make a new conf file
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer
x3,Wandboard
*Server:* LMS Version: 7.9.0 - 1475786002 on Centos 7 VM on ESXi 6 on
Dell T320
*Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud
*Remotes:* iPeng8/Orangesqueeze/PC/Jivelite
*Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs
*Want a webapp ?* See
http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS
------------------------------------------------------------------------
Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290
View this thread: http://forums.slimdevices.com/showthread.php?t=106755
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
