I just ran through the install process again, from the top, and haven't encountered the problem that Grumpy Bob and M-H have reported. I used the 'line out' version of the Pirate Audio board. I'm about to try the steps again on the '3W amp' version in case there's something different. I'm not going to add to the confusion by posting the steps again, until I've checked that they work on the 3W amp board.
The brightness controls now seem to work as they did on my own development version - thanks Ralphy. A few points to note: 1) The Display Off screensaver is implemented (Settings > Screen > Screensavers > When playing/stopped/off > Display Off) 2) The brightness control 'when on' is implemented (Settings > piCorePlayer > Adjust Display Backlight Brightness). 3) The brightness control 'when off' is NOT yet implemented (Settings > piCorePlayer > Adjust Display Backlight Brightness when Powered Off). Because these settings labels are quite long and the screen is narrow, both of these settings look the same in the menu until you let them scroll across the screen. The one that IS implemented is the 4th menu item in the piCorePlayer applet, and the one that is NOT implemented is the 5th one. 4) The screen brightness is only recalled at the next boot if you do a backup before rebooting. ------------------------------------------------------------------------ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
