paul- wrote: > Forget about the squeezelite page, and the default picoreplayer device. > Do everything from the bluetooth page. > > Pair device > Once pairing is complete, Disconnect device (you can use the button) > Wait about 5 seconds, > Reconnect the device (You can use the button) > Whatever name is listed in the player name field ("Boom 3" in your case) > > Goto your lms interface and select "Boom 3" and play. > > When you shut off the bluetooth device, yes it will not be seen in LMS. > That is the way it works, but LMS will remember the device when it shows > up again. Future connections of the bluetooth should start playing > where you left off automatically.
Thanks - I've followed this to the letter, and it seems LMS (v8.) is not remembering the device when it shows up again; the device isn't visible and this is a copy of the Diagnostics-Logs-BT after restart of device but not the connection daemon. pCP Bluetooth extension build:0001 Starting BT Controller bcm43xx_init Flash firmware /lib/firmware/brcm/BCM4345C0.hcd Set Controller UART speed to 3000000 bit/s Device setup complete RPi Bluetooth Hardware Address: DC:A6:32:2A:0B:D7 Starting pCP BT Pairing Agent BT Controller Ready 02-14 16:32 INFO Starting pCP BT Speaker Daemon v6.0.0.0001... 02-14 16:32 INFO Resetting asound.conf. 02-14 16:32 INFO Removing bt_ from asound.conf 02-14 16:32 INFO Starting connection signal handlers. 02-14 16:33 INFO ---- Caught Connect signal ---- 02-14 16:33 INFO MAC:EC:81:93:27:64:7D 02-14 16:33 INFO PROFILE:a2dp 02-14 16:33 INFO Modes:source 02-14 16:33 INFO Unknown device EC:81:93:27:64:7D 02-14 16:33 INFO ---- Caught Disconnect signal ---- 02-14 16:33 INFO MAC:EC:81:93:27:64:7D 02-14 16:33 INFO PROFILE:a2dp 02-14 16:33 INFO Removing bt_BOOM_3 from asound.conf 02-14 16:33 INFO ---- Caught Connect signal ---- 02-14 16:33 INFO MAC:EC:81:93:27:64:7D 02-14 16:33 INFO PROFILE:a2dp 02-14 16:33 INFO Modes:source 02-14 16:34 INFO Starting pCP BT Speaker Daemon v6.0.0.0001... 02-14 16:34 INFO Resetting asound.conf. 02-14 16:34 INFO Removing bt_ from asound.conf 02-14 16:34 INFO Found a2dp source EC:81:93:27:64:7D connected. 02-14 16:34 INFO No squeezelite process for device EC:81:93:27:64:7D. Starting squeezelite...... 02-14 16:34 INFO Connected BOOM 3 02-14 16:34 INFO Starting squeezelite with output device: bt_BOOM_3 02-14 16:34 INFO Checking for squeezelite pid:10177 02-14 16:34 INFO Player Connected to LMS at: 192.168.2.200:9000 02-14 16:34 INFO Sending Play command for BOOM 3 to LMS at 192.168.2.200 02-14 16:34 INFO Starting connection signal handlers. 02-14 16:35 INFO ---- Caught Disconnect signal ---- 02-14 16:35 INFO MAC:EC:81:93:27:64:7D 02-14 16:35 INFO PROFILE:a2dp 02-14 16:35 INFO Checking for squeezelite pid:10177 02-14 16:35 INFO Sending Poweroff command for BOOM 3 to LMS at 192.168.2.200 02-14 16:35 INFO Disconnected BOOM 3 02-14 16:35 INFO Removing bt_BOOM_3 from asound.conf 02-14 16:36 INFO ---- Caught Connect signal ---- 02-14 16:36 INFO MAC:EC:81:93:27:64:7D 02-14 16:36 INFO PROFILE:a2dp 02-14 16:36 INFO Modes:source ------------------------------------------------------------------------ simonheard's Profile: http://forums.slimdevices.com/member.php?userid=57556 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix