Thanks Peter. That's what I have on my player downstairs and it works great. However it uses infrared and the one in my car isn't really in a spot where an infrared remote can hit it.
Also, not that it matters, but I really don't understand why the one with the 7" screen will work somewhat and the other will not. Pretty much the exact same set up. Thanks, Howard peterw wrote: > See this thread: > https://forums.slimdevices.com/showthread.php?110640-Howto-create-a-linux-kernel-IR-remote-keytable-for-Jivelite-on-piCorePlayer-5 > > All you need to do is connect a TSOP4838 (super easy: direct connections > to Pi pins for Ground, 3.3V, and a GPIO) then use the pCP web UI to > install keytables support and set the GPIO pin setting if you're not > using the default (GPIO 25? 27?). To allow your remote to turn the Pi > "on" when it's "off", in Jivelite you might need to go to Settings > > piCorePlayer a > nd enable the checkbox. That's it. Note: these are "GPIO" pin numbers, > not Pi pin numbers, e.g. GPIO 27 is on pin 13 of a 3b: > https://pinout.xyz/pinout/pin13_gpio27 > > (Note: that's for getting a real Squeezebox remote working; I don't know > about Kodi codes.) ------------------------------------------------------------------------ Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
