Hi all, wish to thank all the developers for the wonderful work they're
doing on piCorePlayer: such an integrated system ready to run on
Raspberry is a dream come true for anyone willing to experiment a little
with the verious options.
I am also here to seek help for a couple of players I just
updated/installed and not working properly in a few features.
The main non working feature is the bluetooth in one of the players.
In the updated player that I going to call "basement" the sw versions
are as it follows:
basement | piCorePlayer v6.1.0 | www v0009 | linux 4.19.122-pcpCore_v7 |
piCore v10.3pCP | Squeezelite v1.9.7-1256-pCP
This is from the bottom line in the web configuration page. On this
player bluetooth work flawlessly and plays anything I play on the
smartphone, including system sounds like notifications and the like.
On another player that I am going to call "bedroom" and I have installed
from scratch and report this versions:
bedroom | piCorePlayer v6.1.0 | www v0009 | linux
4.19.122-pcpCore_v7 | piCore v10.3pCP | Squeezelite v1.9.7-1256-pCP
bluetooth starts fine, pairs fine with a smartphone, but no sound comes
out of the DAC, nor from the integrated Raspberry audio jack, when I
play anything on the smartphone.
Here is the bluetooth log from the non-working bedroom player:
Code:
--------------------
pCP Bluetooth extension build:0011
Starting BT Controller
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM4345C0.hcd
Set BDADDR UART: b8:27:eb:d6:78:4d
Set Controller UART speed to 3000000 bit/s
Device setup complete
RPi Bluetooth Hardware Address: B8:27:EB:D6:78:4D
Starting pCP BT Pairing Agent
BT Controller Ready
01-01 01:00 CET INFO ------------Starting pCP BT Speaker Daemon
v6.0.0.0010------------
01-01 01:00 CET INFO Resetting asound.conf.
01-01 01:00 CET INFO Removing bt_ from asound.conf
01-01 01:00 CET INFO Current contents of /usr/local/etc/pcp/pcp-bt.conf.
01-01 01:00 CET INFO BC:A5:8B:E6:17:C6#texarkana#10000#2
01-01 01:00 CET INFO D8:50:E6:08:D4:30#ME173X#10000#2
01-01 01:00 CET DEBUG PCM Devices found dbus.Dictionary({},
signature=dbus.Signature('oa{sv}'))
01-01 01:00 CET INFO Starting connection signal handlers.
06-29 18:58 CEST INFO ---- Caught Connect signal ----
06-29 18:58 CEST DEBUG
/org/bluealsa/hci0/dev_BC_A5_8B_E6_17_C6/a2dpsnk/source
06-29 18:58 CEST DEBUG HCI:hci0
06-29 18:58 CEST INFO MAC:BC:A5:8B:E6:17:C6
06-29 18:58 CEST INFO TRANSPORT:a2dpsnk
06-29 18:58 CEST DEBUG pCP OUTPUT="hw:CARD=D10,DEV=0"
06-29 18:58 CEST DEBUG pCP ALSAVOLUME=""
06-29 18:58 CEST DEBUG pCP Card Conf:"USB.conf"
06-29 18:58 CEST INFO Starting player:"texarkana" bluetooth, alsa
device:"hw:CARD=D10,DEV=0", volume:"".
06-29 19:00 CEST INFO ---- Caught Disconnect signal ----
06-29 19:00 CEST DEBUG HCI:hci0
06-29 19:00 CEST INFO MAC:BC:A5:8B:E6:17:C6
06-29 19:00 CEST INFO TRANSPORT:a2dpsnk
06-29 19:00 CEST INFO Stopping playback from texarkana
--------------------
texarkana is a Samsung A6+ smartphone that I connected to both basement
and bedroom player, but working only on the basement player, while on
the bedroom player I posted the log from, produces no sound whatsoever.
Anyone can help with this issue?
Thanx in advance.
Paolo
------------------------------------------------------------------------
psychokiller's Profile: http://forums.slimdevices.com/member.php?userid=67282
View this thread: http://forums.slimdevices.com/showthread.php?t=111972
_______________________________________________
unix mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/unix
