Grumpy Bob wrote: > I'm not clear what is required to boot a Zero2-W with the 32 bit image. > My most recent attempt to boot one headless: > 1. added a [PI02] entry in config.txt in boot partition > 2. added an empty file netusb to boot partition > 3. edited wpa_supplicant.conf with my WiFi details > > The device boots to a steady green LED but isn't able to join the > network. Presumably there is something else I need to do. (I am familiar > with setting up the original PiZero by directly editing > wpa_supplicant.conf.) > > Robert
Bob, you need to follow the instructions as per Chill's post:- https://forums.slimdevices.com/showthread.php?115331-New-RPi-Zero-2-W&p=1036945&viewfull=1#post1036945 it works the same for 32 bit as 64 bit I have not been able to make netusb work at all :( If you use Raspberry PI OS Buster-Lite you can connect via the usb-on-the-go (I use a shim) and install squeezelite and configure wireless via raspi-config ronnie ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=115331 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
