I encountered a similar problem today.
Digi2 on a Raspberry Pi 4 Model B Rev 1.5, powered by standard Pi4 power supply, no other connections other than SD card and Digi2. First I was using piCorePlayer 8.1.0, 64 Bit Kernel: I set the audio output to Hifiberry Digi+ Pro as commonly advised and squeezelite immediately stopped working after reboot. Then I began to search for explanations: This is pcp_boot.log: Code: -------------------- [ INFO ] pcp_boot.log Starting piCorePlayer v8.1.0 startup... Loading aes kernel modules for faster SSL... Done. Starting rngd using /dev/hwrng... Done. Checking for boot files on mmcblk0p1... Trying to mount /dev/mmcblk0p1. ssh file found on mmcblk0p1. newpcp.cfg not found on mmcblk0p1. Setting default piCorePlayer repository... Generating sound card drop-down list... Starting WiFi on wlan0... udhcpc: started, v1.34.1 udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting select for 192.168.178.48, server 192.168.178.1 udhcpc: lease of 192.168.178.48 obtained from 192.168.178.1, lease time 864000 deleting routers route: SIOCDELRT: No such process adding dns 192.168.178.1 Starting WiFi... Done. Loading piCorePlayer configuration file... Done. Loading pcp-lms-functions... Done. WAITING FOR SOUND CARD SNDRPIHIFIBERRY TO POPULATE......................................... FAILED TO FIND SNDRPIHIFIBERRY... DONE (42). Waiting for network. Done (1). Starting OpenSSH server... Done. Mounting USB Drives... Mounting USB Drive: dcf19a53-9d0a-44e7-92b6-2ae4089c815f... mount: /dev/mmcblk0p3 mounted on /mnt/data. Disk Mounted at /mnt/data. Done. Waiting for valid date before starting LMS... Done. (0) Starting LMS, this can take some time...[22-01-20 12:00:40.1857] main::init (390) Starting Logitech Media Server (v8.2.0, 1627922070, Tue Aug 3 11:43:18 CEST 2021) perl 5.032001 - aarch64-linux-thread-multi Slimserver Running pid:9011 Done. Waiting for LMS to initiate... Done (3). Starting Squeezelite and/or Shairport-sync... Done. Starting httpd web server... Done. Starting to advertise pcp.local... Done. Setting CPU scaling governor to ondemand... Done. Creating static footer... Done. Finished piCorePlayer v8.1.0 startup. To setup piCorePlayer, use the web interface via a browser: - http: //192. 168. 178. 48 (wlan0) - http: //pcp. local (mdnsd) Press [Enter] to access console. In the background, ntpd is syncing time between piCorePlayer and the internet. A large offset between 1970 and now is normal. -------------------- After this, I installed HifiberryOS and after connecting to the device via Ethernet, I was presented with a "Beocreate" surface where I could choose which speaker to amplify. I think this is not correct. Then I tried piCorePlayer ver. 6.1, 7, 8, 8.1 all in 32 Bit Kernel, after using 64 Bit Kernel yesterday with ver 8.1. I could not connect to piCorePlayer versions 6.1 and 7 over Ethernet and had no patience to troubleshoot the reason why. The versions 8 and 8.1 do all show squeezelite not running. With 8.1 I tried to add force_eeprom_read=0 to the config.txt, but this did not change a thing. In the submenu "HAT information" is an entry which baffles me: although piCorePlayer cannot start the Digi2 as indicated in pcp_boot.log, there is information about a Digi2 Pro. Not even Digi+ Pro, which is the overlay used in piCorePlayer settings, but Digi2. how comes this? Code: -------------------- HAT information name hat product Digi2 Pro product_id 0x0000 product_ver 0x0000 uuid 5af941bb-4dcf-4eac-82a8-e36e84fcabef vendor HiFiBerry DATA: "hat", "Digi2 Pro", "0x0000", "0x0000", "5af941bb-4dcf-4eac-82a8-e36e84fcabef", "HiFiBerry", dmesg | grep soc:sound [ INFO ] dmesg Overlays in /mnt/mmcblk0p1/config.txt [ INFO ] Overlays dtoverlay=disable-bt dtoverlay=hifiberry-digi-pro -------------------- I am about to send this board back, but would still like to get it going if it was possible. Any ideas how to continue? ------------------------------------------------------------------------ sheeple's Profile: http://forums.slimdevices.com/member.php?userid=72502 View this thread: http://forums.slimdevices.com/showthread.php?t=115381 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix