sheeple wrote: > I encountered a similar problem today. > > Digi2 on a Raspberry Pi 4 Model B Rev 1.5, powered by standard Pi4 power > supply, no other connections other than SD card and Digi2. > > First I was using piCorePlayer 8.1.0, 64 Bit Kernel: > > I set the audio output to Hifiberry Digi+ Pro as commonly advised and > squeezelite immediately stopped working after reboot. Then I began to > search for explanations: > > After this, I installed HifiberryOS and after connecting to the device > via Ethernet, I was presented with a "Beocreate" surface where I could > choose which speaker to amplify. I think this is not correct. > > I am about to send this board back, but would still like to get it going > if it was possible. Any ideas how to continue?
I don't understand your experience with the HiFiBerry OS, I have used it several times without a problem However, I suggest you try a copy of 'https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-lite.zip ' (https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-lite.zip) Install the overlay and squeezelite and see if the board is recognised If you need any help, just ask :) ronnie ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=115381 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
