I was playing around with the "Pinch to Zoom an object" lesson at:
http://lessons.runrev.com/s/lessons/m/4069/l/11509-how-do-i-implement-a-multi-touch-pinch-motion
And I wanted to add rotate to it as well so that I could pinch and rotate at
the same time. I ran into a big wall (called Math I think) in trying to rotate
based on how far from the original start point and wether I was rotating left
or right.
My solution works for the most part but it is not optimal or very clean and
wanted to invite others to take a stab at it:
I stated with the Pinch lesson stack and changed the GRAPHIC to an IMAGE and
then modified the script to come up with this solution. This script goes into
the card script and the card has an image named "square" on it. I edited it and
added the rotateimage handler;
local sTouchArray, sFRAMEWIDTH, sFRAMEHEIGHT
on touchStart pId, pX, pY
put the width of image "square" into sFRAMEWIDTH
put the height of image "square" into sFRAMEHEIGHT
end touchStart
on touchEnd pId
delete variable sTouchArray[pId]
end touchEnd
on touchMove pId, pX, pY
if sTouchArray[pId]["startloc"] is empty then
put (pX & comma & pY) into sTouchArray[pId]["startloc"]
end if
put (pX & comma & pY) into sTouchArray[pId]["currentloc"]
if the number of lines of the keys of sTouchArray is 2 then
# First lets get the data out of the array
put line 1 of the keys of sTouchArray into tPointOne
put line 2 of the keys of sTouchArray into tPointTwo
# First lets calculate the size of the picture base on the distance
# between the two touch points
put sTouchArray[tPointOne]["startloc"] into tStartLoc1
put sTouchArray[tPointTwo]["startloc"] into tStartLoc2
put sTouchArray[tPointOne]["currentLoc"] into tCurrentLoc1
if tStartLoc1 is not empty and tStartLoc2 is not empty then
put resizeDistance(tStartLoc1, tStartLoc2) into tStartDistance
put resizeDistance(sTouchArray[tPointOne]["currentloc"],
sTouchArray[tPointTwo]["currentloc"]) into tCurrentDistance
resizeimage tStartDistance, tCurrentDistance
if item 2 of tStartLoc1 < item 2 of tCurrentLoc1 then
rotateimage "left", item 2 of tStartLoc1, item 2 of tCurrentLoc1
else
rotateimage "right", item 2 of tStartLoc1, item 2 of
tCurrentLoc1
end if
end if
end if
end touchMove
function resizeDistance pLoc1, pLoc2
local dy, dx, tDistance
put item 2 of pLoc1 - item 2 of pLoc2 into dy
put item 1 of pLoc1 - item 1 of pLoc2 into dx
put sqrt((dy*dy) + (dx*dx)) into tDistance
return tDistance
end resizeDistance
on rotateimage pAngle pStart pNew
if pAngle contains "left" then
put pStart - pNew into tDistance
set the angle of image "square" to tDistance
else
put pNew - pStart into tDistance
set the angle of image "square" to (- tDistance)
end if
unlock screen
end rotateimage
on resizeimage pStartDistance, pNewDistance
# Work out the percentage change between the old and new image
put round((pNewDistance / pStartDistance) * 100) into tPercentage
# Store the original location of the image
put the loc of image "square" into tLoc
# Calculate the new width and height
set the width of image "square" to round(sFRAMEWIDTH * (tPercentage / 100))
set the height of image "square" to round(sFRAMEHEIGHT * (tPercentage /
100))
set the loc of image "square" to tLoc
unlock screen
end resize image
-- Tom McGrath III
http://lazyriver.on-rev.com
[email protected]
_______________________________________________
use-livecode mailing list
[email protected]
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode