-----Original Message----- From: mdbarber <md...@aol.com> Sent: Tuesday, April 10, 2018 3:45 AM To: Joseph L. Casale <jcas...@activenetwerx.com> Subject: Re: change of ip address > the guacd.conf and guacamole properties confirm the pointers are to > "localhost" no mention in there of ip addresses > > to give a little more detail i have my main desktop running a vbox > ubuntu 16.04server all is setup and working with a > mixture of vmware player and vbox windows clients and basic > authentication on guac. > ll i do is change from dhcp to static on server and i can still connect > to the guac interface ok, connect to the server/ssh connection i have > set up in guac even connect to the native ssh with putty and my mssql > connection to my app is fine, it appears to only be an issue with guac/rdp > connections to the windows clients after the change.
In that case, it sounds like your networking configuration when you migrate to static is slightly incorrect. Tough to speculate but with the virtualization products you are using, some use bridging or nat which can cause issues like this were depending on the destination, you may or may not reach it as a result of where in the topology the source and destination reside. Simplest might be to look at the default gateway and mask when you use a dynamic IP versus static (probably the issue). You can also fire up tcpdump with some basic filtering to see if packets return etc. Ps. Remember to reply-all so the list gets a copy.
