vhd-util must have execution bit set. make chmod +x for it. Vadim.
-----Original Message----- From: Tejas Sheth [mailto:tshet...@gmail.com] Sent: Thursday, November 27, 2014 1:41 PM To: users@cloudstack.apache.org Subject: Re: security group and xenserver query Hi Jayapal, kindly find the output from above mention command. both location i have copied vhd-util manually #ls -l /opt/cloud/bin/vhd-util -rw-r--r-- 1 root root 318977 Sep 19 2012 /opt/cloud/bin/vhd-util # find /opt/ -iname vhd-util /opt/cloud/bin/vhd-util /opt/xensource/bin/vhd-util Following is the link for SMlog.log in pastebin.com http://pastebin.com/rzcmSbGJ Thanks and regards, Tejas On Thu, Nov 27, 2014 at 4:31 PM, Jayapal Reddy Uradi < jayapalreddy.ur...@citrix.com> wrote: > Hi Tejas, > > Can also please send the corresponding xenserver logs /var/log/SMLog. > When this error is seen in the MS, at the same time take xenserver logs. > For this error xenserver logs will help. > > What is the cloudstack version are you using ? > > For your reference: > #find /opt/ -iname vhd-util > /opt/cloud/bin/vhd-util > #ls -l /opt/cloud/bin/vhd-util > -rwxr-xr-x 1 root root 318977 Sep 19 2012 /opt/cloud/bin/vhd-util > > > Thanks, > Jayapal > > On 27-Nov-2014, at 4:18 PM, Tejas Sheth <tshet...@gmail.com> > wrote: > > > Hello Jayapal, > > > > > > kindly find cloudstack-management log link for pastebin.com > > > > http://pastebin.com/VAgcfN05 > > > > Thanks. > > Tejas > > > > On Thu, Nov 27, 2014 at 12:24 PM, Jayapal Reddy Uradi < > > jayapalreddy.ur...@citrix.com> wrote: > > > >> Please share full length of logs in pastebin.com to get the reason > >> for failure of the systemvm. > >> Along with the MS logs also check the host logs (/var/log/SMLog). > >> > >> Check systemvm.iso is present in the host. > >> > >> Thanks, > >> Jayapal > >> > >> > >> On 27-Nov-2014, at 11:49 AM, Tejas Sheth <tshet...@gmail.com> > >> wrote: > >> > >>> Hello Guyz, > >>> > >>> We are facing issue starting system VM. deployment is in > >>> production so really need your help. following is the log entry > >>> for the error and > >> detail > >>> of the issue is defiend in my previous mail trail. > >>> > >>> 2014-11-26 21:45:31,516 ERROR [c.c.v.VirtualMachineManagerImpl] > >>> (secstorage-1:ctx-6761d068) Failed to start instance > >>> VM[SecondaryStorageVm|s-10-VM] > >>> 2014-11-26 21:46:01,499 ERROR [c.c.v.VirtualMachineManagerImpl] > >>> (secstorage-1:ctx-1085a3ab) Failed to start instance > >>> VM[SecondaryStorageVm|s-11-VM] > >>> > >>> Catch Exception com.cloud.utils.exception.CloudRuntimeException > >>> for template + due to > >>> com.cloud.utils.exception.CloudRuntimeException: can > >> not > >>> create vdi in sr 3e1f2113-438a-05e7-1b46-4c9b14d56144 > >>> com.cloud.utils.exception.CloudRuntimeException: can not create > >>> vdi in > sr > >>> 3e1f2113-438a-05e7-1b46-4c9b14d56144 > >>> 2014-11-27 00:00:25,075 INFO [o.a.c.s.v.VolumeServiceImpl] > >>> (secstorage-1:ctx-b64088a4) Unable to acquire lock on > >> VMTemplateStoragePool > >>> 684 > >>> > >>> > >>> Exception while trying to start secondary storage vm > >>> com.cloud.exception.AgentUnavailableException: Resource [Host:2] > >>> is > >>> unreachable: Host 2: Unable to start instance due to null > >>> 2014-11-26 21:43:31,828 INFO > >>> [c.c.s.s.SecondaryStorageManagerImpl] > >>> (secstorage-1:ctx-be9596e4) Unable to start secondary storage vm > >>> for standby capacity, secStorageVm vm Id : 6, will recycle it and > >>> start a > new > >>> one > >>> > >>> Appriciate an immidiate help for above issue. > >>> > >>> > >>> Thanks, > >>> Tejas > >>> > >>> On Nov 27, 2014 1:51 AM, "Geoff Higginbottom" < > >>> geoff.higginbot...@shapeblue.com> wrote: > >>> > >>>> Sorry Nux, but YES there are Customer Specific VLANs in a > >>>> Security > Group > >>>> enabled Advanced Zone. > >>>> > >>>> When you create an Advanced Zone with Security Groups you > >>>> initially > >> create > >>>> a 'default guest network' and you allocate a VLAN and IP range to > >>>> this network. This is then used by System VMs and can also be > >>>> used by all Accounts. > >>>> > >>>> However you can then, as a Root Admin, create additional Guest > Networks > >>>> using the 'Offering for shared security group enabled networks' > >>>> and dedicate this to a Domain or an Account. When doing so you > >>>> allocate a different VLAN for each additional Guest Network. > >>>> > >>>> The IP range allocated to each network can be either a true > >>>> Public IP range OR a Private IP range fronted by a > >>>> Router/Firewall/Load Balancer > >> etc > >>>> but this will be outside of CloudStack control. > >>>> > >>>> So to answer the original question it is possible to allocate a > separate > >>>> VLAN to each Guest Network and if required to front this network > >>>> with > a > >>>> Load Balancer and Firewall to provide additional services, but > >>>> you > need > >> to > >>>> manage these devices separately so is not a typical configuration > >>>> for > a > >>>> Public Cloud, but could be used in a Private Cloud. > >>>> > >>>> Kind Regards > >>>> > >>>> Geoff Higginbottom > >>>> CTO / Cloud Architect > >>>> > >>>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 > >>>> > >>>> geoff.higginbot...@shapeblue.com | www.shapeblue.com | > >> Twitter:@shapeblue > >>>> > >>>> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS > >>>> > >>>> > >>>> ________________________________________ > >>>> From: Nux! <n...@li.nux.ro> > >>>> Sent: 26 November 2014 10:46 > >>>> To: users@cloudstack.apache.org > >>>> Subject: Re: security group and xenserver query > >>>> > >>>> No, in Advanced Zone with SG - just like in Basic zone - there is > >>>> no > per > >>>> customer VLAN; there are no firewall, load balancer or additional > NICs; > >>>> there is also no IPv6. > >>>> > >>>> A VM will just get a public IP via DHCP and that's it, the > >>>> customers > are > >>>> isolated via "security groups" which is a fancy name for iptables > rules. > >>>> > >>>> Hope this clears it up. > >>>> > >>>> -- > >>>> Sent from the Delta quadrant using Borg technology! > >>>> > >>>> Nux! > >>>> www.nux.ro > >>>> > >>>> ----- Original Message ----- > >>>>> From: "Tejas Sheth" <tshet...@gmail.com> > >>>>> To: users@cloudstack.apache.org > >>>>> Sent: Wednesday, 26 November, 2014 10:14:11 > >>>>> Subject: Re: security group and xenserver query > >>>> > >>>>> Thanks for simplification, > >>>>> so it means that each account will have seprate VLAN with its > >>>>> own > >> subnet > >>>>> and those VLANs will be created and configured in physical switch? > >>>>> > >>>>> if architecture is above mentioned way configured then how can > >>>>> we > >> achieve > >>>>> NAT and loadbalancing? > >>>>> > >>>>> Thanks > >>>>> Tejas > >>>>> > >>>>> > >>>>> On Wed, Nov 26, 2014 at 3:28 PM, Geoff Higginbottom < > >>>>> geoff.higginbot...@shapeblue.com> wrote: > >>>>> > >>>>>> I like to think of Advanced Network with SG as simply multiple > >>>>>> Basic Networks, each on its own VLAN. You have the same > >>>>>> features (or > rather > >>>> lack > >>>>>> of) as you would with a Basic Zone, but you have multiple Guest > >>>> Networks. > >>>>>> > >>>>>> Regards > >>>>>> > >>>>>> Geoff Higginbottom > >>>>>> > >>>>>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 > >>>>>> > >>>>>> geoff.higginbot...@shapeblue.com > >>>>>> > >>>>>> -----Original Message----- > >>>>>> From: Tejas Sheth [mailto:tshet...@gmail.com] > >>>>>> Sent: 26 November 2014 09:53 > >>>>>> To: users@cloudstack.apache.org > >>>>>> Subject: Re: security group and xenserver query > >>>>>> > >>>>>> so NAT and loadbalancers are not possible if we use security group? > >>>>>> > >>>>>> so it meanse there will be no internal and external IPs for > >>>>>> VMs. is > it > >>>>>> correct? > >>>>>> > >>>>>> On Wed, Nov 26, 2014 at 3:14 PM, Jayapal Reddy Uradi < > >>>>>> jayapalreddy.ur...@citrix.com> wrote: > >>>>>> > >>>>>>> For SG networks there is no public network. > >>>>>>> We configure public ips for the guest network. > >>>>>>> > >>>>>>> -Jayapal > >>>>>>> > >>>>>>> On 26-Nov-2014, at 12:00 PM, Tejas Sheth <tshet...@gmail.com> > >>>>>>> wrote: > >>>>>>> > >>>>>>>> Hello, > >>>>>>>> > >>>>>>>> I have made the bridge configuration, but when i am selecting > >>>>>>>> advance zone. it is not showing public network configuration. > >>>>>>>> only guest and management is availabel. also internal CIDR ip > >>>>>>>> configuration is also not available. > >>>>>>>> i think it is cinverting to basic zone if we select security > >>>>>>>> group and xenserver as hypervisor. > >>>>>>>> > >>>>>>>> Thanks > >>>>>>>> Tejas > >>>>>>>> > >>>>>>>> On Tue, Nov 25, 2014 at 9:16 PM, Jayapal Reddy Uradi < > >>>>>>>> jayapalreddy.ur...@citrix.com> wrote: > >>>>>>>> > >>>>>>>>> > >>>>>>>>> For 6.2 you no need to install CSP. My typo mistake in last mail. > >>>>>>>>> sysctl.conf is fine. > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Thanks, > >>>>>>>>> Jayapal > >>>>>>>>> > >>>>>>>>> On 25-Nov-2014, at 8:45 PM, Tejas Sheth <tshet...@gmail.com> > >>>>>>>>> wrote: > >>>>>>>>> > >>>>>>>>>> Thanks, > >>>>>>>>>> > >>>>>>>>>> So can i take it as confirmation and proceed with only > >>>>>>>>>> following bridge configuration in xenserver 6.2? > >>>>>>>>>> > >>>>>>>>>> # xe-switch-network-backend bridge > >>>>>>>>>> > >>>>>>>>>> # vi /etc/sysctl.conf > >>>>>>>>>> net.bridge.bridge-nf-call-iptables = 1 > >>>>>>>>>> net.bridge.bridge-nf-call-ip6tables = 0 > >>>>>>>>>> net.bridge.bridge-nf-call-arptables = 1 > >>>>>>>>>> > >>>>>>>>>> # sysctl -p /etc/sysctl.conf > >>>>>>>>>> > >>>>>>>>>> Require confirmation for sysctl.cnf configuration part. > >>>>>>>>>> > >>>>>>>>>> Thanks and regards, > >>>>>>>>>> Tejas > >>>>>>>>>> > >>>>>>>>>> On Tue, Nov 25, 2014 at 8:31 PM, Vadim Kimlaychuk < > >>>>>>>>> vadim.kimlayc...@elion.ee > >>>>>>>>>>> wrote: > >>>>>>>>>> > >>>>>>>>>>> XenServer does not need any package to be expicitly installed. > >>>>>>>>>>> When > >>>>>>> you > >>>>>>>>>>> add host to CS it copies some files to the host itself and > >>>>>>>>>>> you don't > >>>>>>>>> need > >>>>>>>>>>> to bother about them usually. > >>>>>>>>>>> > >>>>>>>>>>> Vadim. > >>>>>>>>>>> > >>>>>>>>>>> -----Original Message----- > >>>>>>>>>>> From: Tejas Sheth [mailto:tshet...@gmail.com] > >>>>>>>>>>> Sent: Tuesday, November 25, 2014 4:52 PM > >>>>>>>>>>> To: users@cloudstack.apache.org > >>>>>>>>>>> Subject: security group and xenserver query > >>>>>>>>>>> > >>>>>>>>>>> Hello Jayapal, > >>>>>>>>>>> > >>>>>>>>>>> Thanks for reply, I have understood the bridge > >>>>>>>>>>> configuration > part > >>>>>>>>>>> but can you clarify CSP package part. > >>>>>>>>>>> > >>>>>>>>>>> if CSP package comes with xenserver 6.2 then do we need to > >>>>>>>>>>> install it explicitly? > >>>>>>>>>>> > >>>>>>>>>>> It would be really helpful if you can send link to install > >>>>>>>>>>> CSP > in > >>>>>>>>>>> xenserver 6.2 because CS 4.3 document do not have > >>>>>>>>>>> description > for > >>>>>>>>> xenserver > >>>>>>>>>>> 6.2 CSP installation. > >>>>>>>>>>> > ---------------------------------------------------------------- > >>>>>>>>>>> Hi Tejas, > >>>>>>>>>>> > >>>>>>>>>>> The network mode set to 'bridge' mode. > >>>>>>>>>>> #xe-switch-network-backend bridge > >>>>>>>>>>> > >>>>>>>>>>> I think Xenserver 6.2 comes with the CSP package, so you > >>>>>>>>>>> need > to > >>>>>>> install > >>>>>>>>>>> it explicitly. > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> Thanks, > >>>>>>>>>>> Jayapal > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> On 25-Nov-2014, at 4:47 PM, Tejas Sheth > >>>>>>>>>>> <tshet...@gmail.com> > >>>>>>>>>>> wrote: > >>>>>>>>>>> > >>>>>>>>>>>> Hello, > >>>>>>>>>>>> > >>>>>>>>>>>> We are configuring advanced zone in cloudstack 4.3 in > xenserver > >>>>>> 6.2. > >>>>>>>>>>>> we want to configure security group in advance zone. do > >>>>>>>>>>>> we > have > >>>>>>>>>>>> to do any special configuration in xenserver 6.2. > >>>>>>>>>>>> > >>>>>>>>>>>> xenserver has default networking configuration. > >>>>>>>>>>>> > >>>>>>>>>>>> Thanks and regards, > >>>>>>>>>>>> Tejas > >>>>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>> > >>>>>>> > >>>>>> Find out more about ShapeBlue and our range of CloudStack > >>>>>> related > >>>> services > >>>>>> > >>>>>> IaaS Cloud Design & Build< > >>>>>> http://shapeblue.com/iaas-cloud-design-and-build//> > >>>>>> CSForge – rapid IaaS deployment framework< > >> http://shapeblue.com/csforge/ > >>>>> > >>>>>> CloudStack > >>>>>> Consulting<http://shapeblue.com/cloudstack-consultancy/> > >>>>>> CloudStack Software Engineering< > >>>>>> http://shapeblue.com/cloudstack-software-engineering/> > >>>>>> CloudStack Infrastructure Support< > >>>>>> http://shapeblue.com/cloudstack-infrastructure-support/> > >>>>>> CloudStack Bootcamp Training Courses< > >>>>>> http://shapeblue.com/cloudstack-training/> > >>>>>> > >>>>>> This email and any attachments to it may be confidential and > >>>>>> are > >>>> intended > >>>>>> solely for the use of the individual to whom it is addressed. > >>>>>> Any > >> views > >>>> or > >>>>>> opinions expressed are solely those of the author and do not > >> necessarily > >>>>>> represent those of Shape Blue Ltd or related companies. If you > >>>>>> are > not > >>>> the > >>>>>> intended recipient of this email, you must neither take any > >>>>>> action > >> based > >>>>>> upon its contents, nor copy or show it to anyone. Please > >>>>>> contact the > >>>> sender > >>>>>> if you believe you have received this email in error. Shape > >>>>>> Blue Ltd > >> is > >>>> a > >>>>>> company incorporated in England & Wales. ShapeBlue Services > >>>>>> India > LLP > >>>> is a > >>>>>> company incorporated in India and is operated under license > >>>>>> from > Shape > >>>> Blue > >>>>>> Ltd. Shape Blue Brasil Consultoria Ltda is a company > >>>>>> incorporated in > >>>> Brasil > >>>>>> and is operated under license from Shape Blue Ltd. ShapeBlue SA > >>>>>> Pty > >> Ltd > >>>> is > >>>>>> a company registered by The Republic of South Africa and is > >>>>>> traded > >> under > >>>>>> license from Shape Blue Ltd. ShapeBlue is a registered trademark. > >>>> Find out more about ShapeBlue and our range of CloudStack related > >> services > >>>> > >>>> IaaS Cloud Design & Build< > >>>> http://shapeblue.com/iaas-cloud-design-and-build//> > >>>> CSForge – rapid IaaS deployment framework< > http://shapeblue.com/csforge/ > >>> > >>>> CloudStack > >>>> Consulting<http://shapeblue.com/cloudstack-consultancy/> > >>>> CloudStack Software Engineering< > >>>> http://shapeblue.com/cloudstack-software-engineering/> > >>>> CloudStack Infrastructure Support< > >>>> http://shapeblue.com/cloudstack-infrastructure-support/> > >>>> CloudStack Bootcamp Training Courses< > >>>> http://shapeblue.com/cloudstack-training/> > >>>> > >>>> This email and any attachments to it may be confidential and are > >> intended > >>>> solely for the use of the individual to whom it is addressed. Any > views > >> or > >>>> opinions expressed are solely those of the author and do not > necessarily > >>>> represent those of Shape Blue Ltd or related companies. If you > >>>> are not > >> the > >>>> intended recipient of this email, you must neither take any > >>>> action > based > >>>> upon its contents, nor copy or show it to anyone. Please contact > >>>> the > >> sender > >>>> if you believe you have received this email in error. Shape Blue > >>>> Ltd > is > >> a > >>>> company incorporated in England & Wales. ShapeBlue Services India > >>>> LLP > >> is a > >>>> company incorporated in India and is operated under license from > >>>> Shape > >> Blue > >>>> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated > >>>> in > >> Brasil > >>>> and is operated under license from Shape Blue Ltd. ShapeBlue SA > >>>> Pty > Ltd > >> is > >>>> a company registered by The Republic of South Africa and is > >>>> traded > under > >>>> license from Shape Blue Ltd. ShapeBlue is a registered trademark. > >>>> > >> > >> > >
