Hi Tejas, Set executable permission to vhd-util #chmod +x /opt/cloud/bin/vhd-util
After this hopefully next spin of ssvm will come up. Thanks, Jayapal On 27-Nov-2014, at 5:10 PM, Tejas Sheth <tshet...@gmail.com> wrote: > Hi Jayapal, > > kindly find the output from above mention command. both location i have > copied vhd-util manually > #ls -l /opt/cloud/bin/vhd-util > -rw-r--r-- 1 root root 318977 Sep 19 2012 /opt/cloud/bin/vhd-util > > # find /opt/ -iname vhd-util > /opt/cloud/bin/vhd-util > /opt/xensource/bin/vhd-util > > Following is the link for SMlog.log in pastebin.com > > http://pastebin.com/rzcmSbGJ > > > Thanks and regards, > Tejas > > On Thu, Nov 27, 2014 at 4:31 PM, Jayapal Reddy Uradi < > jayapalreddy.ur...@citrix.com> wrote: > >> Hi Tejas, >> >> Can also please send the corresponding xenserver logs /var/log/SMLog. >> When this error is seen in the MS, at the same time take xenserver logs. >> For this error xenserver logs will help. >> >> What is the cloudstack version are you using ? >> >> For your reference: >> #find /opt/ -iname vhd-util >> /opt/cloud/bin/vhd-util >> #ls -l /opt/cloud/bin/vhd-util >> -rwxr-xr-x 1 root root 318977 Sep 19 2012 /opt/cloud/bin/vhd-util >> >> >> Thanks, >> Jayapal >> >> On 27-Nov-2014, at 4:18 PM, Tejas Sheth <tshet...@gmail.com> >> wrote: >> >>> Hello Jayapal, >>> >>> >>> kindly find cloudstack-management log link for pastebin.com >>> >>> http://pastebin.com/VAgcfN05 >>> >>> Thanks. >>> Tejas >>> >>> On Thu, Nov 27, 2014 at 12:24 PM, Jayapal Reddy Uradi < >>> jayapalreddy.ur...@citrix.com> wrote: >>> >>>> Please share full length of logs in pastebin.com to get the reason for >>>> failure of the systemvm. >>>> Along with the MS logs also check the host logs (/var/log/SMLog). >>>> >>>> Check systemvm.iso is present in the host. >>>> >>>> Thanks, >>>> Jayapal >>>> >>>> >>>> On 27-Nov-2014, at 11:49 AM, Tejas Sheth <tshet...@gmail.com> >>>> wrote: >>>> >>>>> Hello Guyz, >>>>> >>>>> We are facing issue starting system VM. deployment is in production so >>>>> really need your help. following is the log entry for the error and >>>> detail >>>>> of the issue is defiend in my previous mail trail. >>>>> >>>>> 2014-11-26 21:45:31,516 ERROR [c.c.v.VirtualMachineManagerImpl] >>>>> (secstorage-1:ctx-6761d068) Failed to start instance >>>>> VM[SecondaryStorageVm|s-10-VM] >>>>> 2014-11-26 21:46:01,499 ERROR [c.c.v.VirtualMachineManagerImpl] >>>>> (secstorage-1:ctx-1085a3ab) Failed to start instance >>>>> VM[SecondaryStorageVm|s-11-VM] >>>>> >>>>> Catch Exception com.cloud.utils.exception.CloudRuntimeException for >>>>> template + due to com.cloud.utils.exception.CloudRuntimeException: can >>>> not >>>>> create vdi in sr 3e1f2113-438a-05e7-1b46-4c9b14d56144 >>>>> com.cloud.utils.exception.CloudRuntimeException: can not create vdi in >> sr >>>>> 3e1f2113-438a-05e7-1b46-4c9b14d56144 >>>>> 2014-11-27 00:00:25,075 INFO [o.a.c.s.v.VolumeServiceImpl] >>>>> (secstorage-1:ctx-b64088a4) Unable to acquire lock on >>>> VMTemplateStoragePool >>>>> 684 >>>>> >>>>> >>>>> Exception while trying to start secondary storage vm >>>>> com.cloud.exception.AgentUnavailableException: Resource [Host:2] is >>>>> unreachable: Host 2: Unable to start instance due to null >>>>> 2014-11-26 21:43:31,828 INFO [c.c.s.s.SecondaryStorageManagerImpl] >>>>> (secstorage-1:ctx-be9596e4) Unable to start secondary storage vm for >>>>> standby capacity, secStorageVm vm Id : 6, will recycle it and start a >> new >>>>> one >>>>> >>>>> Appriciate an immidiate help for above issue. >>>>> >>>>> >>>>> Thanks, >>>>> Tejas >>>>> >>>>> On Nov 27, 2014 1:51 AM, "Geoff Higginbottom" < >>>>> geoff.higginbot...@shapeblue.com> wrote: >>>>> >>>>>> Sorry Nux, but YES there are Customer Specific VLANs in a Security >> Group >>>>>> enabled Advanced Zone. >>>>>> >>>>>> When you create an Advanced Zone with Security Groups you initially >>>> create >>>>>> a 'default guest network' and you allocate a VLAN and IP range to this >>>>>> network. This is then used by System VMs and can also be used by all >>>>>> Accounts. >>>>>> >>>>>> However you can then, as a Root Admin, create additional Guest >> Networks >>>>>> using the 'Offering for shared security group enabled networks' and >>>>>> dedicate this to a Domain or an Account. When doing so you allocate a >>>>>> different VLAN for each additional Guest Network. >>>>>> >>>>>> The IP range allocated to each network can be either a true Public IP >>>>>> range OR a Private IP range fronted by a Router/Firewall/Load Balancer >>>> etc >>>>>> but this will be outside of CloudStack control. >>>>>> >>>>>> So to answer the original question it is possible to allocate a >> separate >>>>>> VLAN to each Guest Network and if required to front this network with >> a >>>>>> Load Balancer and Firewall to provide additional services, but you >> need >>>> to >>>>>> manage these devices separately so is not a typical configuration for >> a >>>>>> Public Cloud, but could be used in a Private Cloud. >>>>>> >>>>>> Kind Regards >>>>>> >>>>>> Geoff Higginbottom >>>>>> CTO / Cloud Architect >>>>>> >>>>>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 >>>>>> >>>>>> geoff.higginbot...@shapeblue.com | www.shapeblue.com | >>>> Twitter:@shapeblue >>>>>> >>>>>> ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS >>>>>> >>>>>> >>>>>> ________________________________________ >>>>>> From: Nux! <n...@li.nux.ro> >>>>>> Sent: 26 November 2014 10:46 >>>>>> To: users@cloudstack.apache.org >>>>>> Subject: Re: security group and xenserver query >>>>>> >>>>>> No, in Advanced Zone with SG - just like in Basic zone - there is no >> per >>>>>> customer VLAN; there are no firewall, load balancer or additional >> NICs; >>>>>> there is also no IPv6. >>>>>> >>>>>> A VM will just get a public IP via DHCP and that's it, the customers >> are >>>>>> isolated via "security groups" which is a fancy name for iptables >> rules. >>>>>> >>>>>> Hope this clears it up. >>>>>> >>>>>> -- >>>>>> Sent from the Delta quadrant using Borg technology! >>>>>> >>>>>> Nux! >>>>>> www.nux.ro >>>>>> >>>>>> ----- Original Message ----- >>>>>>> From: "Tejas Sheth" <tshet...@gmail.com> >>>>>>> To: users@cloudstack.apache.org >>>>>>> Sent: Wednesday, 26 November, 2014 10:14:11 >>>>>>> Subject: Re: security group and xenserver query >>>>>> >>>>>>> Thanks for simplification, >>>>>>> so it means that each account will have seprate VLAN with its own >>>> subnet >>>>>>> and those VLANs will be created and configured in physical switch? >>>>>>> >>>>>>> if architecture is above mentioned way configured then how can we >>>> achieve >>>>>>> NAT and loadbalancing? >>>>>>> >>>>>>> Thanks >>>>>>> Tejas >>>>>>> >>>>>>> >>>>>>> On Wed, Nov 26, 2014 at 3:28 PM, Geoff Higginbottom < >>>>>>> geoff.higginbot...@shapeblue.com> wrote: >>>>>>> >>>>>>>> I like to think of Advanced Network with SG as simply multiple Basic >>>>>>>> Networks, each on its own VLAN. You have the same features (or >> rather >>>>>> lack >>>>>>>> of) as you would with a Basic Zone, but you have multiple Guest >>>>>> Networks. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Geoff Higginbottom >>>>>>>> >>>>>>>> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 >>>>>>>> >>>>>>>> geoff.higginbot...@shapeblue.com >>>>>>>> >>>>>>>> -----Original Message----- >>>>>>>> From: Tejas Sheth [mailto:tshet...@gmail.com] >>>>>>>> Sent: 26 November 2014 09:53 >>>>>>>> To: users@cloudstack.apache.org >>>>>>>> Subject: Re: security group and xenserver query >>>>>>>> >>>>>>>> so NAT and loadbalancers are not possible if we use security group? >>>>>>>> >>>>>>>> so it meanse there will be no internal and external IPs for VMs. is >> it >>>>>>>> correct? >>>>>>>> >>>>>>>> On Wed, Nov 26, 2014 at 3:14 PM, Jayapal Reddy Uradi < >>>>>>>> jayapalreddy.ur...@citrix.com> wrote: >>>>>>>> >>>>>>>>> For SG networks there is no public network. >>>>>>>>> We configure public ips for the guest network. >>>>>>>>> >>>>>>>>> -Jayapal >>>>>>>>> >>>>>>>>> On 26-Nov-2014, at 12:00 PM, Tejas Sheth <tshet...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I have made the bridge configuration, but when i am selecting >>>>>>>>>> advance zone. it is not showing public network configuration. only >>>>>>>>>> guest and management is availabel. also internal CIDR ip >>>>>>>>>> configuration is also not available. >>>>>>>>>> i think it is cinverting to basic zone if we select security group >>>>>>>>>> and xenserver as hypervisor. >>>>>>>>>> >>>>>>>>>> Thanks >>>>>>>>>> Tejas >>>>>>>>>> >>>>>>>>>> On Tue, Nov 25, 2014 at 9:16 PM, Jayapal Reddy Uradi < >>>>>>>>>> jayapalreddy.ur...@citrix.com> wrote: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> For 6.2 you no need to install CSP. My typo mistake in last mail. >>>>>>>>>>> sysctl.conf is fine. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> Jayapal >>>>>>>>>>> >>>>>>>>>>> On 25-Nov-2014, at 8:45 PM, Tejas Sheth <tshet...@gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> So can i take it as confirmation and proceed with only following >>>>>>>>>>>> bridge configuration in xenserver 6.2? >>>>>>>>>>>> >>>>>>>>>>>> # xe-switch-network-backend bridge >>>>>>>>>>>> >>>>>>>>>>>> # vi /etc/sysctl.conf >>>>>>>>>>>> net.bridge.bridge-nf-call-iptables = 1 >>>>>>>>>>>> net.bridge.bridge-nf-call-ip6tables = 0 >>>>>>>>>>>> net.bridge.bridge-nf-call-arptables = 1 >>>>>>>>>>>> >>>>>>>>>>>> # sysctl -p /etc/sysctl.conf >>>>>>>>>>>> >>>>>>>>>>>> Require confirmation for sysctl.cnf configuration part. >>>>>>>>>>>> >>>>>>>>>>>> Thanks and regards, >>>>>>>>>>>> Tejas >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Nov 25, 2014 at 8:31 PM, Vadim Kimlaychuk < >>>>>>>>>>> vadim.kimlayc...@elion.ee >>>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> XenServer does not need any package to be expicitly installed. >>>>>>>>>>>>> When >>>>>>>>> you >>>>>>>>>>>>> add host to CS it copies some files to the host itself and you >>>>>>>>>>>>> don't >>>>>>>>>>> need >>>>>>>>>>>>> to bother about them usually. >>>>>>>>>>>>> >>>>>>>>>>>>> Vadim. >>>>>>>>>>>>> >>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>> From: Tejas Sheth [mailto:tshet...@gmail.com] >>>>>>>>>>>>> Sent: Tuesday, November 25, 2014 4:52 PM >>>>>>>>>>>>> To: users@cloudstack.apache.org >>>>>>>>>>>>> Subject: security group and xenserver query >>>>>>>>>>>>> >>>>>>>>>>>>> Hello Jayapal, >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks for reply, I have understood the bridge configuration >> part >>>>>>>>>>>>> but can you clarify CSP package part. >>>>>>>>>>>>> >>>>>>>>>>>>> if CSP package comes with xenserver 6.2 then do we need to >>>>>>>>>>>>> install it explicitly? >>>>>>>>>>>>> >>>>>>>>>>>>> It would be really helpful if you can send link to install CSP >> in >>>>>>>>>>>>> xenserver 6.2 because CS 4.3 document do not have description >> for >>>>>>>>>>> xenserver >>>>>>>>>>>>> 6.2 CSP installation. >>>>>>>>>>>>> >> ---------------------------------------------------------------- >>>>>>>>>>>>> Hi Tejas, >>>>>>>>>>>>> >>>>>>>>>>>>> The network mode set to 'bridge' mode. >>>>>>>>>>>>> #xe-switch-network-backend bridge >>>>>>>>>>>>> >>>>>>>>>>>>> I think Xenserver 6.2 comes with the CSP package, so you need >> to >>>>>>>>> install >>>>>>>>>>>>> it explicitly. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Jayapal >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On 25-Nov-2014, at 4:47 PM, Tejas Sheth <tshet...@gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>> >>>>>>>>>>>>>> We are configuring advanced zone in cloudstack 4.3 in >> xenserver >>>>>>>> 6.2. >>>>>>>>>>>>>> we want to configure security group in advance zone. do we >> have >>>>>>>>>>>>>> to do any special configuration in xenserver 6.2. >>>>>>>>>>>>>> >>>>>>>>>>>>>> xenserver has default networking configuration. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks and regards, >>>>>>>>>>>>>> Tejas >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> Find out more about ShapeBlue and our range of CloudStack related >>>>>> services >>>>>>>> >>>>>>>> IaaS Cloud Design & Build< >>>>>>>> http://shapeblue.com/iaas-cloud-design-and-build//> >>>>>>>> CSForge – rapid IaaS deployment framework< >>>> http://shapeblue.com/csforge/ >>>>>>> >>>>>>>> CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/> >>>>>>>> CloudStack Software Engineering< >>>>>>>> http://shapeblue.com/cloudstack-software-engineering/> >>>>>>>> CloudStack Infrastructure Support< >>>>>>>> http://shapeblue.com/cloudstack-infrastructure-support/> >>>>>>>> CloudStack Bootcamp Training Courses< >>>>>>>> http://shapeblue.com/cloudstack-training/> >>>>>>>> >>>>>>>> This email and any attachments to it may be confidential and are >>>>>> intended >>>>>>>> solely for the use of the individual to whom it is addressed. Any >>>> views >>>>>> or >>>>>>>> opinions expressed are solely those of the author and do not >>>> necessarily >>>>>>>> represent those of Shape Blue Ltd or related companies. If you are >> not >>>>>> the >>>>>>>> intended recipient of this email, you must neither take any action >>>> based >>>>>>>> upon its contents, nor copy or show it to anyone. Please contact the >>>>>> sender >>>>>>>> if you believe you have received this email in error. Shape Blue Ltd >>>> is >>>>>> a >>>>>>>> company incorporated in England & Wales. ShapeBlue Services India >> LLP >>>>>> is a >>>>>>>> company incorporated in India and is operated under license from >> Shape >>>>>> Blue >>>>>>>> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in >>>>>> Brasil >>>>>>>> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty >>>> Ltd >>>>>> is >>>>>>>> a company registered by The Republic of South Africa and is traded >>>> under >>>>>>>> license from Shape Blue Ltd. ShapeBlue is a registered trademark. >>>>>> Find out more about ShapeBlue and our range of CloudStack related >>>> services >>>>>> >>>>>> IaaS Cloud Design & Build< >>>>>> http://shapeblue.com/iaas-cloud-design-and-build//> >>>>>> CSForge – rapid IaaS deployment framework< >> http://shapeblue.com/csforge/ >>>>> >>>>>> CloudStack Consulting<http://shapeblue.com/cloudstack-consultancy/> >>>>>> CloudStack Software Engineering< >>>>>> http://shapeblue.com/cloudstack-software-engineering/> >>>>>> CloudStack Infrastructure Support< >>>>>> http://shapeblue.com/cloudstack-infrastructure-support/> >>>>>> CloudStack Bootcamp Training Courses< >>>>>> http://shapeblue.com/cloudstack-training/> >>>>>> >>>>>> This email and any attachments to it may be confidential and are >>>> intended >>>>>> solely for the use of the individual to whom it is addressed. Any >> views >>>> or >>>>>> opinions expressed are solely those of the author and do not >> necessarily >>>>>> represent those of Shape Blue Ltd or related companies. If you are not >>>> the >>>>>> intended recipient of this email, you must neither take any action >> based >>>>>> upon its contents, nor copy or show it to anyone. Please contact the >>>> sender >>>>>> if you believe you have received this email in error. Shape Blue Ltd >> is >>>> a >>>>>> company incorporated in England & Wales. ShapeBlue Services India LLP >>>> is a >>>>>> company incorporated in India and is operated under license from Shape >>>> Blue >>>>>> Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in >>>> Brasil >>>>>> and is operated under license from Shape Blue Ltd. ShapeBlue SA Pty >> Ltd >>>> is >>>>>> a company registered by The Republic of South Africa and is traded >> under >>>>>> license from Shape Blue Ltd. ShapeBlue is a registered trademark. >>>>>> >>>> >>>> >> >>
