Hu! I'ld recommend to log in to your ssvm and check if everything is able to connect.
I second dag's suggestion to double check your network setup. Inside your ssvm I'ld run /usr/local/cloud/systemvm/ssvm-check.sh also ip a s ip r s As an educated guess: did you setup your storage-network to the same cidr as your management-network? if yes, maybe the default route inside your ssvm is setup wrong (on the wrong NIC or errenously set up twice on two NICs) cheers, - Stephan Am Mittwoch, den 04.04.2018, 13:53 +0530 schrieb Swastik Mittal: > @Dag > > By legacy I meant one way ssl. I have set ca strictness for client as > false. > > I am using 1 nic common for all the network, that is one bridge > serving > both public and private network. > > I am setting up a basic zone so I set my management within ip range > of 10 > and guest within a range of 100, and my statement vms get ip assigned > within those ranges successfully. > > I used these similar configuration with ACL 4.6 and was able to run > vm's > successfully. > > Regards > Swastik > > On 4 Apr 2018 1:44 p.m., "Dag Sonstebo" <dag.sonst...@shapeblue.com> > wrote: > > > > > Swastik, > > > > Your issue is most likely with your network configuration rather > > than > > anything to do with firewalls or system VM templates. > > > > First of all – what do you mean by legacy mode? Are you referring > > to > > advanced or basic zone? > > > > Secondly – can you tell us how you have configured your networking? > > > > - How many NICs you are using and how have you configured them > > - What management vs public IP ranges you are using > > - How you have mapped your networking in CloudStack against the > > underlying > > hardware NICs > > - Can you also check what your “host” global setting is set to > > > > Regards, > > Dag Sonstebo > > Cloud Architect > > ShapeBlue > > > > On 04/04/2018, 09:07, "Swastik Mittal" <mittal.swas...@gmail.com> > > wrote: > > > > @jagdish > > > > Yes I was using the same link. > > > > > > dag.sonst...@shapeblue.com > > www.shapeblue.com > > 53 Chandos Place, Covent Garden, London WC2N 4HSUK > > @shapeblue > > > > > > > > On 4 Apr 2018 1:07 p.m., "Jagdish Patil" <jagdishpatil...@gmail.com > > > > > wrote: > > > > > Hey Swastik, > > > > > > download.cloudstack.org link doesn't look like an issue, but > > which > > version > > > and which hypervisor are you using? > > > > > > For KVM, download this: > > > http://download.cloudstack.org/systemvm/4.11/systemvmtemplat > > e-4.11.0-kvm. > > > qcow2.bz2 > > > > > > Regards, > > > Jagdish Patil > > > > > > On Wed, Apr 4, 2018 at 1:00 PM Swastik Mittal < > > mittal.swas...@gmail.com> > > > wrote: > > > > > > > Hey @jagdish > > > > > > > > I was using download.cloudstack.org to download systemVM. > > Is > > there any > > > > bug within the template uploaded here? > > > > > > > > @Soundar > > > > > > > > I did disable firewall services but din't work. I'll check > > it again > > > though. > > > > > > > > On 4/4/18, soundar rajan <bsoundara...@gmail.com> wrote: > > > > > disabled firewalld service on the hostname and check. you > > should > > able > > > to > > > > > access using console window. > > > > > > > > > > On Wed, Apr 4, 2018 at 10:07 AM, Swastik Mittal < > > > > mittal.swas...@gmail.com> > > > > > wrote: > > > > > > > > > >> Hey, > > > > >> > > > > >> I am installing ACS 4.11 (legacy mode), with management > > and > > host on > > > same > > > > >> server and out-of-band management disabled. My host is > > enabled > > and up > > > > and > > > > >> ssvm successfully running. Though agent state column > > shows only > > '-'. > > > > >> > > > > >> CPVM is also running successfully but when I open > > console > > window I get > > > > >> unable to connect. Also I din't find check file in SSVM > > (accessed > > > > through > > > > >> terminal using ssh). > > > > >> > > > > >> From SSVM I can ssh into management but wget command to > > management > > > local > > > > >> host ain't working (is stuck at connecting but is not > > able to > > > connect.). > > > > >> > > > > >> Agent log does not show any error, just mentions "trying > > to > > fetch > > > > storage > > > > >> pool from libvirt" all the time. I checked my storage > > pool > > through > > > > "virsh > > > > >> pool-list" and it shows the storage pool mentioned in > > local > > storage > > > > under > > > > >> agent.properties. > > > > >> > > > > >> Any ideas? > > > > >> > > > > >> Regards > > > > >> Swastik > > > > >> > > > > > > > > > > > > > > > > > > -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-44 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin
signature.asc
Description: This is a digitally signed message part
