Swastik,
What is your “host” global setting set to?
Also – the check script should be in /usr/local/cloud/systemvm/ssvm-check.sh –
if this is missing you have other issues – possibly with the systemvm.iso.
Regards,
Dag Sonstebo
Cloud Architect
ShapeBlue
On 04/04/2018, 11:07, "Swastik Mittal" <mittal.swas...@gmail.com> wrote:
Hey @Stephen
I am able to ping my management from ssvm. Also wget to internal
server works fine, it took some time to establish connection
initially.
I don't have any ssvm-check.sh file. I forgot to mention it on this thread.
Outputs:
root@s-1-VM:~# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 0e:00:a9:fe:02:2a brd ff:ff:ff:ff:ff:ff
inet 169.254.2.42/16 brd 169.254.255.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 1e:00:ce:00:00:0e brd ff:ff:ff:ff:ff:ff
inet 10.1.0.43/24 brd 10.1.0.255 scope global eth1
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 1e:00:a1:00:00:a2 brd ff:ff:ff:ff:ff:ff
inet 10.1.0.191/24 brd 10.1.0.255 scope global eth2
root@s-1-VM:~# ip r s
default via 10.1.0.2 dev eth2
10.1.0.0/24 dev eth1 proto kernel scope link src 10.1.0.43
10.1.0.0/24 dev eth2 proto kernel scope link src 10.1.0.191
169.254.0.0/16 dev eth0 proto kernel scope link src 169.254.2.42
Yes, my storage and management are the same.
root@s-1-VM:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
0.0.0.0 10.1.0.2 0.0.0.0 UG 0
0 0 eth2
10.1.0.0 0.0.0.0 255.255.255.0 U 0 0
0 eth1
10.1.0.0 0.0.0.0 255.255.255.0 U 0 0
0 eth2
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0
0 eth0
On 4/4/18, Stephan Seitz <s.se...@heinlein-support.de> wrote:
> Hu!
>
> I'ld recommend to log in to your ssvm and check if everything is able
> to connect.
>
> I second dag's suggestion to double check your network setup.
>
> Inside your ssvm I'ld run
>
> /usr/local/cloud/systemvm/ssvm-check.sh
>
> also
>
> ip a s
> ip r s
>
>
> As an educated guess: did you setup your storage-network to the same
> cidr as your management-network?
>
> if yes, maybe the default route inside your ssvm is setup wrong (on the
> wrong NIC or errenously set up twice on two NICs)
>
>
> cheers,
>
> - Stephan
>
>
>
>
> Am Mittwoch, den 04.04.2018, 13:53 +0530 schrieb Swastik Mittal:
>> @Dag
>>
>> By legacy I meant one way ssl. I have set ca strictness for client as
>> false.
>>
>> I am using 1 nic common for all the network, that is one bridge
>> serving
>> both public and private network.
>>
>> I am setting up a basic zone so I set my management within ip range
>> of 10
>> and guest within a range of 100, and my statement vms get ip assigned
>> within those ranges successfully.
>>
>> I used these similar configuration with ACL 4.6 and was able to run
>> vm's
>> successfully.
>>
>> Regards
>> Swastik
>>
>> On 4 Apr 2018 1:44 p.m., "Dag Sonstebo" <dag.sonst...@shapeblue.com>
>> wrote:
>>
>> >
>> > Swastik,
>> >
>> > Your issue is most likely with your network configuration rather
>> > than
>> > anything to do with firewalls or system VM templates.
>> >
>> > First of all – what do you mean by legacy mode? Are you referring
>> > to
>> > advanced or basic zone?
>> >
>> > Secondly – can you tell us how you have configured your networking?
>> >
>> > - How many NICs you are using and how have you configured them
>> > - What management vs public IP ranges you are using
>> > - How you have mapped your networking in CloudStack against the
>> > underlying
>> > hardware NICs
>> > - Can you also check what your “host” global setting is set to
>> >
>> > Regards,
>> > Dag Sonstebo
>> > Cloud Architect
>> > ShapeBlue
>> >
>> > On 04/04/2018, 09:07, "Swastik Mittal" <mittal.swas...@gmail.com>
>> > wrote:
>> >
>> > @jagdish
>> >
>> > Yes I was using the same link.
>> >
>> >
>> > dag.sonst...@shapeblue.com
>> > www.shapeblue.com
>> > 53 Chandos Place, Covent Garden, London WC2N 4HSUK
>> > @shapeblue
>> >
>> >
>> >
>> > On 4 Apr 2018 1:07 p.m., "Jagdish Patil" <jagdishpatil...@gmail.com
>> > >
>> > wrote:
>> >
>> > > Hey Swastik,
>> > >
>> > > download.cloudstack.org link doesn't look like an issue, but
>> > which
>> > version
>> > > and which hypervisor are you using?
>> > >
>> > > For KVM, download this:
>> > > http://download.cloudstack.org/systemvm/4.11/systemvmtemplat
>> > e-4.11.0-kvm.
>> > > qcow2.bz2
>> > >
>> > > Regards,
>> > > Jagdish Patil
>> > >
>> > > On Wed, Apr 4, 2018 at 1:00 PM Swastik Mittal <
>> > mittal.swas...@gmail.com>
>> > > wrote:
>> > >
>> > > > Hey @jagdish
>> > > >
>> > > > I was using download.cloudstack.org to download systemVM.
>> > Is
>> > there any
>> > > > bug within the template uploaded here?
>> > > >
>> > > > @Soundar
>> > > >
>> > > > I did disable firewall services but din't work. I'll check
>> > it again
>> > > though.
>> > > >
>> > > > On 4/4/18, soundar rajan <bsoundara...@gmail.com> wrote:
>> > > > > disabled firewalld service on the hostname and check. you
>> > should
>> > able
>> > > to
>> > > > > access using console window.
>> > > > >
>> > > > > On Wed, Apr 4, 2018 at 10:07 AM, Swastik Mittal <
>> > > > mittal.swas...@gmail.com>
>> > > > > wrote:
>> > > > >
>> > > > >> Hey,
>> > > > >>
>> > > > >> I am installing ACS 4.11 (legacy mode), with management
>> > and
>> > host on
>> > > same
>> > > > >> server and out-of-band management disabled. My host is
>> > enabled
>> > and up
>> > > > and
>> > > > >> ssvm successfully running. Though agent state column
>> > shows only
>> > '-'.
>> > > > >>
>> > > > >> CPVM is also running successfully but when I open
>> > console
>> > window I get
>> > > > >> unable to connect. Also I din't find check file in SSVM
>> > (accessed
>> > > > through
>> > > > >> terminal using ssh).
>> > > > >>
>> > > > >> From SSVM I can ssh into management but wget command to
>> > management
>> > > local
>> > > > >> host ain't working (is stuck at connecting but is not
>> > able to
>> > > connect.).
>> > > > >>
>> > > > >> Agent log does not show any error, just mentions "trying
>> > to
>> > fetch
>> > > > storage
>> > > > >> pool from libvirt" all the time. I checked my storage
>> > pool
>> > through
>> > > > "virsh
>> > > > >> pool-list" and it shows the storage pool mentioned in
>> > local
>> > storage
>> > > > under
>> > > > >> agent.properties.
>> > > > >>
>> > > > >> Any ideas?
>> > > > >>
>> > > > >> Regards
>> > > > >> Swastik
>> > > > >>
>> > > > >
>> > > >
>> > >
>> >
>> >
>> >
> --
>
> Heinlein Support GmbH
> Schwedter Str. 8/9b, 10119 Berlin
>
> http://www.heinlein-support.de
>
> Tel: 030 / 405051-44
> Fax: 030 / 405051-19
>
> Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht
> Berlin-Charlottenburg,
> Geschäftsführer: Peer Heinlein -- Sitz: Berlin
>
>
dag.sonst...@shapeblue.com
www.shapeblue.com
53 Chandos Place, Covent Garden, London WC2N 4HSUK
@shapeblue
