Hi Anoob and DPDK Dev Team, ------>While we are running the ipsec-secgw application. We are getting following error:
IPSEC: No IPv6 SP Inbound rule specified IPSEC: No IPv6 SP Outbound rule specified Creating IPv4 Routing Table (RT) context with 1024 max routes LPM: Adding route 192.168.122.0/24 (1) ------>Below are the steps we've performed.. Since we don't have IXGBE driver in the virtual machines. we used SRIOV to import the IXGBE NIC's (Virtual function) from host(Physical function). We refered the below link for SRIOV: https://software.intel.com/content/www/us/en/develop/articles/configure-sr-iov-network-virtual-functions-in-linux-kvm.html This the info after importing IXGBE NIC's into virtual machine: -----------> ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: ens8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:bd:f7:ce brd ff:ff:ff:ff:ff:ff 3: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:e5:35:b5 brd ff:ff:ff:ff:ff:ff 4: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:14:ce:7c brd ff:ff:ff:ff:ff:ff 5: ens13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:d0:73:4c brd ff:ff:ff:ff:ff:ff 6: ens3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether 96:42:49:cd:9c:61 brd ff:ff:ff:ff:ff:ff <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 7: ens11: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether 3e:f5:92:ef:9e:16 brd ff:ff:ff:ff:ff:ff <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< 8: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:51:ee:74 brd ff:ff:ff:ff:ff:ff 9: ens14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:da:08:cb brd ff:ff:ff:ff:ff:ff 10: ens15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:31:7c:6f brd ff:ff:ff:ff:ff:ff ------>While we are running the ipsec-secgw application. We are getting following error: IPSEC: No IPv6 SP Inbound rule specified IPSEC: No IPv6 SP Outbound rule specified Creating IPv4 Routing Table (RT) context with 1024 max routes LPM: Adding route 192.168.122.0/24 (1) Checking link status..........................................................................................done Port 0 Link Down <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Port 1 Link Down <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< IPSEC: entering main loop on lcore 0 IPSEC: -- lcoreid=0 portid=0 rxqueueid=0 IPSEC: -- lcoreid=0 portid=1 rxqueueid=0 Please find the attachment which contain console logs. Thanks and Regards
