Hi Anoob and DPDK Dev Team,
> ------>While we are running the ipsec-secgw application. We are getting
> following error:
>
> IPSEC: No IPv6 SP Inbound rule specified
> IPSEC: No IPv6 SP Outbound rule specified
> Creating IPv4 Routing Table (RT) context with 1024 max routes
> LPM: Adding route 192.168.122.0/24 (1)
>
> ------>Below are the steps we've performed..
>
> Since we don't have IXGBE driver in the virtual machines. we used SRIOV to
> import the IXGBE NIC's (Virtual function) from host(Physical function).
> We refered the below link for SRIOV:
>
> https://software.intel.com/content/www/us/en/develop/articles/configure-sr-iov-network-virtual-functions-in-linux-kvm.html
>
> This the info after importing IXGBE NIC's into virtual machine:
> -----------> ip link show
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
> DEFAULT group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> 2: ens8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:bd:f7:ce brd ff:ff:ff:ff:ff:ff
> 3: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:e5:35:b5 brd ff:ff:ff:ff:ff:ff
> 4: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:14:ce:7c brd ff:ff:ff:ff:ff:ff
> 5: ens13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:d0:73:4c brd ff:ff:ff:ff:ff:ff
>
> 6: ens3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
> mode DEFAULT group default qlen 1000
> link/ether 96:42:49:cd:9c:61 brd ff:ff:ff:ff:ff:ff
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> 7: ens11: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
> mode DEFAULT group default qlen 1000
> link/ether 3e:f5:92:ef:9e:16 brd ff:ff:ff:ff:ff:ff
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>
>
> 8: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:51:ee:74 brd ff:ff:ff:ff:ff:ff
> 9: ens14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:da:08:cb brd ff:ff:ff:ff:ff:ff
> 10: ens15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP mode DEFAULT group default qlen 1000
> link/ether 52:54:00:31:7c:6f brd ff:ff:ff:ff:ff:ff
>
> ------>While we are running the ipsec-secgw application. We are getting
> following error:
>
> IPSEC: No IPv6 SP Inbound rule specified
> IPSEC: No IPv6 SP Outbound rule specified
> Creating IPv4 Routing Table (RT) context with 1024 max routes
> LPM: Adding route 192.168.122.0/24 (1)
>
> Checking link
>
> status..........................................................................................done
> Port 0 Link Down
>
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> Port 1 Link Down
>
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> IPSEC: entering main loop on lcore 0
> IPSEC: -- lcoreid=0 portid=0 rxqueueid=0
> IPSEC: -- lcoreid=0 portid=1 rxqueueid=0
>
> Please find the attachment which contain console logs.
>
> Thanks and Regards
>
