Yep, you are right, I missed that one.
I did actually get a ping6 response, for a minute. I already sent out an email to the list so I won't go into detail here.
Thanks Mike
Ed Kapitein wrote:
Hi Mike,
If you use a tunnel to connect to ipv6 land i would expect that you ping6 tun0/sit0 or the other end of the tunnel, not your eth0 interface. If you are using a tunnel, eth0 should only have an ipv4 address, not a ipv6 address.
Hope this helps.
Kind rgards, @
Forwarding is turned on.
The internal clients (1 winxp box, 1 MDK linux box) both obtain an ipv6
address. They can both ping6 to the router's lan interface (eth1),
both
neither can ping6 the outside interface of the router (eth0). From my
experience in the ipv4 world, this would sound like a routing issue, or
gateway issue. I can ping6 the router but can't traverse the router.
Thanks Guys, will keep trying.
Mike
Fredrik Tolf wrote:
--------------------------------------------------------------------- The IPv6 Users Mailing List Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
