Hi list, i have troubles starting my Siemens TC35. Every time i try to start the bearerbox i get this log (i tried all possible configurations in kannel.conf, its always the same) --> any ideas?
thx for your help Thomas 2002-06-19 00:38:30 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200 2002-06-19 00:38:30 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:32 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:36 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:40 [5] DEBUG: AT2[/dev/ttyS0]: -->AT^M 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: device opened 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:46 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:50 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:54 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed 2002-06-19 00:38:58 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates.
