I have the same problem with a Nokia 6210. The system was working perfectly until a power cut. When the power was restored I see the results as below. I don't think the cable is the answer.
Kenn -----Original Message----- From: Richard Bowen [mailto:[EMAIL PROTECTED]] Sent: 19 June 2002 08:50 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: TC-35 Startup Thomas I had the same problem, make sure the speed setting is equal to 19200 in both the smsc at2 group and the modem group. If not it might be your serial cable. Rich >>> Tampier Thomas <[EMAIL PROTECTED]> 06/18/02 23:45 PM >>> Hi list, i have troubles starting my Siemens TC35. Every time i try to start the bearerbox i get this log (i tried all possible configurations in kannel.conf, its always the same) --> any ideas? thx for your help Thomas 2002-06-19 00:38:30 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200 2002-06-19 00:38:30 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:32 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:36 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:40 [5] DEBUG: AT2[/dev/ttyS0]: -->AT^M 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: device opened 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:46 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:50 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:54 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed 2002-06-19 00:38:58 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates. _____________________________________________________________________ This message has been checked for all known viruses by UUNET delivered through the MessageLabs Virus Control Centre. For further information visit http://www.uk.uu.net/products/security/virus/ _____________________________________________________________________ This message has been checked for all known viruses by UUNET delivered through the MessageLabs Virus Control Centre. For further information visit http://www.uk.uu.net/products/security/virus/ ********************************************************************** This Email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this Email in error please notify the system manager. This footnote also confirms that this Email message has been swept by MIMEsweeper and Norton Anti-Virus for the presence of computer viruses. ********************************************************************** VISIT OUR WEBSITE AT HTTP://WWW.DOMINO-PRINTING.COM/ **********************************************************************
