Thomas I had the same problem, make sure the speed setting is equal to 19200 in both the smsc at2 group and the modem group. If not it might be your serial cable.
Rich >>> Tampier Thomas <[EMAIL PROTECTED]> 06/18/02 23:45 PM >>> Hi list, i have troubles starting my Siemens TC35. Every time i try to start the bearerbox i get this log (i tried all possible configurations in kannel.conf, its always the same) --> any ideas? thx for your help Thomas 2002-06-19 00:38:30 [5] INFO: AT2[/dev/ttyS0]: speed set to 19200 2002-06-19 00:38:30 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:32 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:36 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:40 [5] DEBUG: AT2[/dev/ttyS0]: -->AT^M 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: opening device 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: device opened 2002-06-19 00:38:44 [5] INFO: AT2[/dev/ttyS0]: speed set to 9600 2002-06-19 00:38:44 [5] DEBUG: AT2[/dev/ttyS0]: --> ^M 2002-06-19 00:38:46 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:50 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:54 [5] DEBUG: AT2[/dev/ttyS0]: --> AT^M 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: closing device 2002-06-19 00:38:58 [5] INFO: AT2[/dev/ttyS0]: cannot detect speed 2002-06-19 00:38:58 [5] DEBUG: Thread 5 (gw/smsc_at2.c:at2_device_thread) terminates. _____________________________________________________________________ This message has been checked for all known viruses by UUNET delivered through the MessageLabs Virus Control Centre. For further information visit http://www.uk.uu.net/products/security/virus/ _____________________________________________________________________ This message has been checked for all known viruses by UUNET delivered through the MessageLabs Virus Control Centre. For further information visit http://www.uk.uu.net/products/security/virus/
