Exactly, with 1,2,0,0,0, it works :) ! Thanx Nikos Balkanas. I just one error : 2009-09-06 23:43:32 [6227] [4] DEBUG: AT2[/dev/ttyS0]: --> AT\Q3^M 2009-09-06 23:43:32 [6227] [4] DEBUG: AT2[/dev/ttyS0]: <-- ERROR 2009-09-06 23:43:32 [6227] [4] ERROR: AT2[/dev/ttyS0]: Generic error: ERROR 2009-09-06 23:43:32 [6227] [4] INFO: AT2[/dev/ttyS0]: cannot enable hardware handshake
Although there is that error, Bearerbox seems to work. But smsbox doesn't run. I've that error : ju:~# smsbox -v 0 /etc/kannel/kannel.conf [...] 2009-09-06 23:56:11 [6234] [6] DEBUG: Thread 6 (gw/smsbox.c:http_queue_thread) maps to pid 6234. 2009-09-06 23:56:11 [6234] [0] ERROR: connect failed 2009-09-06 23:56:11 [6234] [0] ERROR: System error 111: Connection refused 2009-09-06 23:56:11 [6234] [0] ERROR: error connecting to server `localhost' at port `13001' 2009-09-06 23:56:11 [6234] [0] PANIC: Couldn't connect to the bearerbox. 2009-09-06 23:56:11 [6234] [0] PANIC: smsbox(gw_panic+0x101) [0x8087051] 2009-09-06 23:56:11 [6234] [0] PANIC: smsbox(main+0xf69) [0x8053bd9] 2009-09-06 23:56:11 [6234] [0] PANIC: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7887455] 2009-09-06 23:56:11 [6234] [0] PANIC: smsbox [0x80524c1] Yet, Bearerbox is running... Thanx a lot. Nikos Balkanas wrote: > > Hi, > > You could send AT commands from kannel from your previous mail from > kannel. > No need to pursue with minicom. > > Your problem now is your init-string. Copy your modem definition from > group > modems and modify it. Add: > > init-string = "AT+CNMI = <value>" > > where <value> is different than the offending default of 1,2,0,1,0. You > should consult your modem manufacturer's AT command set or try different > CNMI commands from modems.conf. > > Use this new copy in your configuration. > > BR, > Nikos > > ----- Original Message ----- > From: "Juxener" <[email protected]> > To: <[email protected]> > Sent: Sunday, September 06, 2009 5:38 PM > Subject: Re: Send SMS with Siemens M20 on Linux > > >> >> After trying, I can contact and send AT commands to my M20, with minicom. >> >> >> Juxener wrote: >>> >>> Thanx Nikos. >>> I can send SMS with Gnokii, with /dev/ttyS0 device. My modem works... >>> >>> But I've found my issue : with speed 19200, it's works (the speed >>> attribute was redefined with 9600...) ! It's works... almost. >>> >>> Now, I've this issue : >>> >>> ju:/etc/kannel# bearerbox -v 0 /etc/kannel/sms.conf >>> 2009-09-05 18:20:06 [4205] [4] INFO: AT2[/dev/ttyS0]: opening device >>> 2009-09-05 18:20:06 [4205] [4] DEBUG: AT2[/dev/ttyS0]: device opened >>> 2009-09-05 18:20:07 [4205] [4] DEBUG: AT2[/dev/ttyS0]: device opened >>> 2009-09-05 18:20:07 [4205] [4] INFO: AT2[/dev/ttyS0]: init device >>> 2009-09-05 18:20:07 [4205] [4] INFO: AT2[/dev/ttyS0]: speed set to 19200 >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- AT >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- AT&F >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT\Q3^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >>> 2009-09-05 18:20:08 [4205] [4] ERROR: AT2[/dev/ttyS0]: Generic error: >>> ERROR >>> 2009-09-05 18:20:08 [4205] [4] INFO: AT2[/dev/ttyS0]: cannot enable >>> hardware handshake >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT+CPIN?^M >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- +CPIN: READY >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:08 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: >>> (0,1,128) >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:09 [4205] [4] INFO: AT2[/dev/ttyS0]: Phase 2+ is >>> supported >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=1^M >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: 1,1,1 >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- OK >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: --> >>> AT+CNMI=1,2,0,1,0^M >>> 2009-09-05 18:20:09 [4205] [4] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >>> 2009-09-05 18:20:09 [4205] [4] ERROR: AT2[/dev/ttyS0]: Generic error: >>> ERROR >>> 2009-09-05 18:20:09 [4205] [4] ERROR: AT2[/dev/ttyS0]: Opening failed. >>> Terminating >>> 2009-09-05 18:20:09 [4205] [4] INFO: AT2[/dev/ttyS0]: closing device >>> >>> In sms.conf, I have : >>> group = core >>> admin-port = 13000 >>> admin-password = bar >>> >>> group = modems >>> id = siemens_m20 >>> name = "Siemens M20" >>> detect-string = "SIEMENS" >>> detect-string2 = "M20" >>> speed = 19200 >>> enable-hwhs = "AT\\Q3" >>> keepalive-cmd = "AT+CBC;+CSQ" >>> need-sleep = true >>> >>> group = smsc >>> smsc = at >>> modemtype = siemens_m20 >>> device = /dev/ttyS0 >>> >>> group = smsbox >>> bearerbox-host = localhost >>> sendsms-port = 13013 >>> >>> group = sendsms-user >>> username = tester >>> password = foobar >>> >>> group = sendsms-user >>> username = kannel >>> password = rL4y >>> user-deny-ip = "*.*.*.*" >>> user-allow-ip = "127.0.0.1" >>> >>> group = sms-service >>> keyword = default >>> text = "No service specified" >>> >>> Thanx a lot, again. >>> >>> >>> >>> >>> Nikos Balkanas wrote: >>>> >>>> Hi, >>>> >>>> Your modem doesn't repond. Try the following: >>>> >>>> 1) dmesg | grep tty in Linux. grep tty /var/adm/messages in Solaris. >>>> Verify >>>> you have the correct device for your modem. >>>> >>>> 2) Using minicom or wvdial, connect to device from part (1) and type a >>>> simple AT. If you don't get a response you have a hardware problem >>>> (port, >>>> cable, modem). >>>> >>>> Configure correct parameters to kannel and retry. Assuming you have >>>> the >>>> correct device, and the modem doesn't respond to kannel, it is almost >>>> certainly case (2). >>>> >>>> BR, >>>> Nikos >>>> ----- Original Message ----- >>>> From: "Juxener" <[email protected]> >>>> To: <[email protected]> >>>> Sent: Saturday, September 05, 2009 3:42 PM >>>> Subject: Re: Send SMS with Siemens M20 on Linux >>>> >>>> >>>>> >>>>> Thank you for your answer. >>>>> >>>>> Since my last message, I've better results : with Gnokii, I can send >>>>> SMS >>>>> ! >>>>> Gnokii is not interessant in it, but it proves that my M20 works (with >>>>> my >>>>> new SIM card). And it's configured with the /dev/ttyS0 device... >>>>> >>>>> Unfortunately, it doesn't works with Kannel... always the same error : >>>>> ju:~# bearerbox -v 0 /etc/kannel/sms.conf >>>>> [...] >>>>> 2009-09-05 16:34:33 [2854] [6] DEBUG: AT2[/dev/ttyS0]: device opened >>>>> 2009-09-05 16:34:33 [2854] [6] INFO: AT2[/dev/ttyS0]: init device >>>>> 2009-09-05 16:34:33 [2854] [6] INFO: AT2[/dev/ttyS0]: speed set to >>>>> 9600 >>>>> 2009-09-05 16:34:33 [2854] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M >>>>> 2009-09-05 16:34:37 [2854] [6] ERROR: AT2[/dev/ttyS0]: Wrong or no >>>>> answer >>>>> to >>>>> ATZ, ignoring >>>>> 2009-09-05 16:34:37 [2854] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M >>>>> 2009-09-05 16:34:41 [2854] [6] ERROR: AT2[/dev/ttyS0]: Wrong or no >>>>> answer >>>>> to >>>>> AT. Trying again >>>>> 2009-09-05 16:34:41 [2854] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M >>>>> 2009-09-05 16:34:45 [2854] [6] ERROR: AT2[/dev/ttyS0]: Second attempt >>>>> to >>>>> send AT failed >>>>> 2009-09-05 16:34:45 [2854] [6] ERROR: AT2[/dev/ttyS0]: Opening failed. >>>>> Terminating >>>>> 2009-09-05 16:34:45 [2854] [6] INFO: AT2[/dev/ttyS0]: closing device >>>>> [...] >>>>> >>>>> I don't no what to do.... >>>>> Thanx a lot. >>>>> >>>>> >>>>> >>>>> Nikos Balkanas wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> I don't know gnokii, and I am not interested in it. However, I do >>>>>> know >>>>>> wvdial, minicom and statserial all useful tools to diagnose serial >>>>>> problems. >>>>>> >>>>>> Are you sure your modem is at /dev/ttyS0? What does: >>>>>> >>>>>> dmesg | grep tty >>>>>> >>>>>> show? >>>>>> >>>>>> BR, >>>>>> Nikos >>>>>> ----- Original Message ----- >>>>>> From: "Juxener" <[email protected]> >>>>>> To: <[email protected]> >>>>>> Sent: Wednesday, August 19, 2009 9:05 PM >>>>>> Subject: Re: Send SMS with Siemens M20 on Linux >>>>>> >>>>>> >>>>>>> >>>>>>> Thanks for your answer Jovan, >>>>>>> >>>>>>> but in my /etc/kannel/sms.conf I've : >>>>>>> include = "/etc/kannel/modems.conf" >>>>>>> >>>>>>> And in my /etc/kannel/modems.conf I've : >>>>>>> group = modems >>>>>>> id = siemens_m20 >>>>>>> name = "Siemens M20" >>>>>>> detect-string = "SIEMENS" >>>>>>> detect-string2 = "M20" >>>>>>> speed = 19200 >>>>>>> enable-hwhs = "AT\\Q3" >>>>>>> keepalive-cmd = "AT+CBC;+CSQ" >>>>>>> need-sleep = true >>>>>>> >>>>>>> But that doesn't works... >>>>>>> >>>>>>> >>>>>>> >>>>>>> Jovan Kostovski-2 wrote: >>>>>>>> >>>>>>>> On Mon, Aug 17, 2009 at 12:01 AM, Juxener<[email protected]> wrote: >>>>>>>>> >>>>>>>>> Hello, >>>>>>>>> sorry for my english (I'm french). >>>>>>>>> >>>>>>>>> I'm trying to use an Siemens M20 modem >>>>>>>>> (http://www.coster.info/costerit/teleges/doc/gsm812s.pdf), to send >>>>>>>>> a >>>>>>>>> text. >>>>>>>>> I'm on Linux. >>>>>>>> >>>>>>>> Check this list message: >>>>>>>> http://www.ultraviolet.org/mail-archives/kannel.2006/msg01164.html >>>>>>>> >>>>>>>> BR, Jovan >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> View this message in context: >>>>>>> http://www.nabble.com/Send-SMS-with-Siemens-M20-on-Linux-tp24941326p25049150.html >>>>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> View this message in context: >>>>> http://www.nabble.com/Send-SMS-with-Siemens-M20-on-Linux-tp24941326p25308016.html >>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >> >> -- >> View this message in context: >> http://www.nabble.com/Send-SMS-with-Siemens-M20-on-Linux-tp24941326p25318392.html >> Sent from the Kannel - User mailing list archive at Nabble.com. >> >> > > > > -- View this message in context: http://www.nabble.com/Send-SMS-with-Siemens-M20-on-Linux-tp24941326p25321330.html Sent from the Kannel - User mailing list archive at Nabble.com.
