Precisely. ids should match precisely, so that needed groups can find it. They use case sensitive search. So, id should match modemtype, name is whatever you want to show in the logs, and detect should be exactly what modem throws.
BR, Nikos ----- Original Message ----- From: Kenny Orisanaiye To: Nikos Balkanas Cc: [email protected] ; [email protected] Sent: Wednesday, October 07, 2009 11:17 AM Subject: Re: problem with GSM Modem Hi, So in effect, uppercase or lowercase would work. Is that? Then consistency is that is needed. -- Kenny e: [email protected] w: www.nuObjects.com Bulk SMS Solutions | Managed Hosting | Enterprise Application Development 2009/10/7 Nikos Balkanas <[email protected]> Hi, Just a note to avoid confusion. In the cvs modems.conf id, wavecom is in lower case: group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" Therefore if working with that, modemtype in group smsc should also be: modemtype = wavecom as well. BR, Nikos ----- Original Message ----- From: Kenny Orisanaiye To: [email protected] Cc: [email protected] Sent: Wednesday, October 07, 2009 1:08 AM Subject: Re: problem with GSM Modem Hi Elvis, I also use Wavecom Fastrack Supreme and after much trial and errors with the setting i discoved that the default settings works just fine for us. Below is an extract from our config. ######################## group = modems id = WAVECOM name = "WAVECOM" detect-string = "WAVECOM" ######################## ######################## group = smsc smsc = at smsc-id = mSmsc modemtype = WAVECOM device = /dev/ttyS0 my-number = ************ connect-allow-ip = ****** log-level = 0 ######################## Additionally, you need to be sure your modem is on /dev/ttyS0 . If you are using Linux, run # wvdialconf /etc/wvdial.conf This will do a scan and give you a visual display of the available modem and 'location'. -- Kenny e: [email protected] w: www.nuObjects.com Bulk SMS Solutions | Managed Hosting | Enterprise Application Development On Tue, Oct 6, 2009 at 2:50 PM, Elvis Manuel Jorge <[email protected]> wrote: I did that you told me Alejandro but It didn't work I'm having the same error, somebody that has worked with Wavecom modem help me. Thanks On Mon, 2009-10-05 at 23:10 +0200, Alejandro Guerrieri wrote: > Try changing "wavecom" for "WAVECOM" on the detect-string. > > > Regards, > > > Alex > > On Mon, Oct 5, 2009 at 10:58 PM, Elvis Manuel Jorge > <[email protected]> wrote: > Hello all... > > I had configured kannel to use my cellphone (Sony Ericsson > P1i) as > modem, but know I bought a Wavecom Fastrack Supreme 20 modem > and I've > couldn't configure correctly, here they are the errors and my > configuration file. Please I need you to help me. > > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: --> ATI^M > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- WAVECOM > WIRELESS CPU > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- MULTIBAND > G850 > 1900 > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: <-- OK > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Cannot detect > modem, > using generic > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Reading modem > definitions from <smskannel2.conf> > 2009-10-05 16:49:18 [3143] [6] DEBUG: AT2[gsm]: Found <1> > modems in > config > 2009-10-05 16:49:18 [3143] [6] PANIC: AT2[gsm]: Cannot detect > modem and > generic not found > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox(gw_panic > +0xc2) > [0x80cbf72] > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x806ca22] > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x806d5b1] > 2009-10-05 16:49:18 [3143] [6] PANIC: ./bearerbox [0x80c2831] > 2009-10-05 16:49:18 [3143] [6] PANIC: /lib/libpthread.so.0 > [0x72b50b] > 2009-10-05 16:49:18 [3143] [6] PANIC: /lib/libc.so.6(clone > +0x5e) > [0x66cb2e] > > group = core > admin-port = 13000 > smsbox-port = 13001 > admin-password = bar > admin-allow-ip = "*.*.*.*" > log-file = "/var/log/kannel/kannel.log" > log-level = 0 > access-log = "/var/log/kannel/access.log" > > group = modems > id = wavecom > name = "wavecom" > detect-string = "wavecom" > init-string = "ATZ" > init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > group = smsc > smsc = at > modemtype = auto > smsc-id = gsm > device = /dev/ttyS0 > my-number = +18298666697 > sms-center = +18098599999 > log-level = 0 > > group = sendsms-user > username = tester > password = foobar > user-allow-ip = "*.*.*.*" > > group = sms-service > keyword = nop > text = "You asked nothing and I did it!" > > group = sms-service > keyword = default > catch-all = yes > accept-x-kannel-headers = true > assume-plain-text = true > text = "No service specified" > -- INSERT -- > > > > > > >
