Hi, What is cdc_acm? It doesn't look like a modem. What do you have connected to your PC?
Next step is to use minicom or wvdial and connect to /dev/ttyACM0. In minicom issue an AT command. It should reply with an AT. BR, Nikos ----- Original Message ----- From: Rajeev Agarwal To: Nikos Balkanas Cc: [email protected] Sent: Friday, December 11, 2009 10:41 AM Subject: Re: Sony Ericsson for Kannel hi! after dmesg | grep tty i got the following [ 0.004000] console [tty0] enabled [ 1.276807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.277100] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [10283.432323] cdc_acm 8-2:1.0: ttyACM0: USB ACM device [10387.225333] cdc_acm 8-1:1.0: ttyACM0: USB ACM device [10570.342537] cdc_acm 8-2:1.0: ttyACM0: USB ACM device how do i decode the above stuff??? 2009/12/11 Nikos Balkanas <[email protected]> Hi, If it is not a modem you cannot use it as an SMSc. And without an SMSc you cannot send/receive SMS. As Isaac suggested, with your modem connected to your server, after rebooting, do: If you don't get anything, your mobile is not a modem, and you cannot use it. To send/receive SMS you will have to either get an SMSc connection or get a GPRS modem. BR, Nikos ----- Original Message ----- From: Rajeev Agarwal To: Nikos Balkanas Cc: [email protected] Sent: Friday, December 11, 2009 10:22 AM Subject: Re: Sony Ericsson for Kannel hi yes the mobile does have a USB port. If it is not modem should i remove the modem details from the conf file? btw have a look at this raj...@insi:~/Desktop$ ls -lrt /dev/ttyA* crw-rw---- 1 root dialout 166, 0 2009-12-11 12:44 /dev/ttyACM0 2009/12/11 Nikos Balkanas <[email protected]> Hi, If the mobile is not detected by the OS, you won't need an init string. Simply put the mobile is not a modem. Does the mobile feature a USB or serial port? BR, Nikos ----- Original Message ----- From: Rajeev Agarwal To: Isaac Sanni-Thomas Cc: [email protected] Sent: Friday, December 11, 2009 9:25 AM Subject: Re: Sony Ericsson for Kannel that ain't working! how to i get the init string? 2009/12/11 Isaac Sanni-Thomas <[email protected]> On 12/11/2009 05:45 AM, Rajeev Agarwal wrote: Hi! I was wondering is it possible to use a Sony Ericsson W 580i phone as a modem for sending sms? I havent used a Sony Ericsson but rather a Nokia. However you can setup the modem group and smsc group as shown in the user guide. To be sure the phone can be used, do this: Connect the phone to the computer and as root do this r...@your-computer#dmesg|grep -i "Sony" r...@your-computer#tail -n30 /var/log/messages|grep -i "Sony" You must see a link to the device file /dev/ttyACM0 or something similar which shows connection to your phone. Configure kannel accordingly to use the device file that points to your phone. Read the user manual on configuring group=modems group=smsc for using phones as virtual smsc. Regards Rajeev.
