After installing wvdial i get the following
raj...@insi:~/Desktop$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 OK --> Modem initialized. --> Configuration does not specify a valid phone number. --> Configuration does not specify a valid login name. --> Configuration does not specify a valid password. raj...@insi:~/Desktop$ 2009/12/11 Nikos Balkanas <[email protected]> > Hi, > > What is cdc_acm? It doesn't look like a modem. What do you have connected > to your PC? > > Next step is to use minicom or wvdial and connect to /dev/ttyACM0. In > minicom issue an AT command. It should reply with an AT. > > BR, > Nikos > > ----- Original Message ----- > *From:* Rajeev Agarwal <[email protected]> > *To:* Nikos Balkanas <[email protected]> > *Cc:* [email protected] > *Sent:* Friday, December 11, 2009 10:41 AM > *Subject:* Re: Sony Ericsson for Kannel > > hi! > > after dmesg | grep tty i got the following > > [ 0.004000] console [tty0] enabled > [ 1.276807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.277100] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [10283.432323] cdc_acm 8-2:1.0: ttyACM0: USB ACM device > [10387.225333] cdc_acm 8-1:1.0: ttyACM0: USB ACM device > [10570.342537] cdc_acm 8-2:1.0: ttyACM0: USB ACM device > > > how do i decode the above stuff??? > > 2009/12/11 Nikos Balkanas <[email protected]> > >> Hi, >> >> If it is not a modem you cannot use it as an SMSc. And without an SMSc you >> cannot send/receive SMS. >> >> As Isaac suggested, with your modem connected to your server, after >> rebooting, do: >> >> >> If you don't get anything, your mobile is not a modem, and you cannot use >> it. To send/receive SMS you will have to either get an SMSc connection or >> get a GPRS modem. >> >> BR, >> Nikos >> >> ----- Original Message ----- >> *From:* Rajeev Agarwal <[email protected]> >> *To:* Nikos Balkanas <[email protected]> >> *Cc:* [email protected] >> *Sent:* Friday, December 11, 2009 10:22 AM >> *Subject:* Re: Sony Ericsson for Kannel >> >> hi >> yes the mobile does have a USB port. >> >> If it is not modem should i remove the modem details from the conf file? >> >> btw have a look at this >> >> raj...@insi:~/Desktop$ <raj...@insi:%7E/Desktop$> ls -lrt /dev/ttyA* >> crw-rw---- 1 root dialout 166, 0 2009-12-11 12:44 /dev/ttyACM0 >> >> >> 2009/12/11 Nikos Balkanas <[email protected]> >> >>> Hi, >>> >>> If the mobile is not detected by the OS, you won't need an init string. >>> Simply put the mobile is not a modem. >>> >>> Does the mobile feature a USB or serial port? >>> >>> BR, >>> Nikos >>> >>> ----- Original Message ----- >>> *From:* Rajeev Agarwal <[email protected]> >>> *To:* Isaac Sanni-Thomas <[email protected]> >>> *Cc:* [email protected] >>> *Sent:* Friday, December 11, 2009 9:25 AM >>> *Subject:* Re: Sony Ericsson for Kannel >>> >>> that ain't working! >>> >>> how to i get the init string? >>> >>> 2009/12/11 Isaac Sanni-Thomas <[email protected]> >>> >>>> >>>> >>>> On 12/11/2009 05:45 AM, Rajeev Agarwal wrote: >>>> >>>>> Hi! >>>>> >>>>> I was wondering is it possible to use a Sony Ericsson W 580i phone as a >>>>> modem for sending sms? >>>>> >>>>> >>>>> I havent used a Sony Ericsson but rather a Nokia. >>>> However you can setup the modem group and smsc group as shown in the >>>> user guide. >>>> To be sure the phone can be used, do this: >>>> Connect the phone to the computer and as root do this >>>> r...@your-computer#dmesg|grep -i "Sony" >>>> r...@your-computer#tail -n30 /var/log/messages|grep -i "Sony" >>>> >>>> You must see a link to the device file /dev/ttyACM0 or something similar >>>> which shows connection to your phone. >>>> Configure kannel accordingly to use the device file that points to your >>>> phone. Read the user manual on configuring group=modems group=smsc for >>>> using >>>> phones as virtual smsc. >>>> >>>>> Regards >>>>> >>>>> Rajeev. >>>>> >>>>> >>>> >>> >> >
