raj...@insi:~/Desktop$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ OK --> Sending: *ATQ0 V1 E1 S0=0 &C1 &D2* ---> is this the init-string? OK --> Modem initialized. --> Configuration does not specify a valid phone number. --> Configuration does not specify a valid login name. --> Configuration does not specify a valid password. raj...@insi:~/Desktop$
2009/12/11 Nikos Balkanas <[email protected]> > Use the init-string given by wvdial. > > BR, > Nikos > > ----- Original Message ----- > *From:* Rajeev Agarwal <[email protected]> > *To:* Nikos Balkanas <[email protected]> > *Cc:* [email protected] > *Sent:* Friday, December 11, 2009 11:39 AM > *Subject:* Re: Sony Ericsson for Kannel > > this is how i configured the modem thingy > > group = modems > id = moto > name = "Motorola" > #detect-string = "Motorola" > #keepalive-cmd = "AT+CMGL" > #init-string = "AT+CNMI=1,2,0,1,0" > > > > but i am getting the following > > 009-12-11 14:52:37 [11527] [0] INFO: Kannel bearerbox II version 1.4.3 > starting > 2009-12-11 14:52:37 [11527] [0] INFO: MAIN: Start-up done, entering > mainloop > 2009-12-11 14:52:37 [11527] [0] DEBUG: AT2[SMSC]: start called > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: device opened. Telnet > mode = 0 > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: device opened > 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: Logging in > 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: init device > 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: speed set to 9600 > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> ATZ^M > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- ATZ > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT^M > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT&F^M > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> ATE0^M > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT+IFC=2,2^M > *2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- ERROR > 2009-12-11 14:52:37 [11527] [6] ERROR: AT2[SMSC]: Generic error: ERROR > 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: cannot enable hardware > handshake* > 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CPIN?^M > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CPIN: READY > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CMGF=0^M > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CSMS=?^M > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CSMS: 128 > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK > 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CNMI=1,2,0,1,0^M > 2*009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CMS ERROR: 513 > 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: CMS ERROR: +CMS ERROR: > 513 > 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: CMS ERROR: Error number > unknown. Ask google and add it. (513) > 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: Initialization of device > failed.* > 2009-12-11 14:52:38 [11527] [6] INFO: AT2[SMSC]: Closing device > 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: Couldn't connect > (retrying in 10 seconds). > > > > > > > 2009/12/11 Nikos Balkanas <[email protected]> > >> OK. Seems your modem is working. Configure it for /dev/ttyACM0. >> Read how-to in User's Guide. >> >> BR, >> Nikos >> >> ----- Original Message ----- >> *From:* Rajeev Agarwal <[email protected]> >> *To:* Nikos Balkanas <[email protected]> >> *Cc:* [email protected] >> *Sent:* Friday, December 11, 2009 11:06 AM >> *Subject:* Re: Sony Ericsson for Kannel >> >> After installing wvdial i get the following >> >> >> raj...@insi:~/Desktop$ <raj...@insi:%7E/Desktop$> wvdial >> --> WvDial: Internet dialer version 1.60 >> --> Cannot get information for serial port. >> --> Initializing modem. >> --> Sending: ATZ >> ATZ >> OK >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> OK >> --> Modem initialized. >> --> Configuration does not specify a valid phone number. >> --> Configuration does not specify a valid login name. >> --> Configuration does not specify a valid password. >> raj...@insi:~/Desktop$ >> >> >> 2009/12/11 Nikos Balkanas <[email protected]> >> >>> Hi, >>> >>> What is cdc_acm? It doesn't look like a modem. What do you have connected >>> to your PC? >>> >>> Next step is to use minicom or wvdial and connect to /dev/ttyACM0. In >>> minicom issue an AT command. It should reply with an AT. >>> >>> BR, >>> Nikos >>> >>> ----- Original Message ----- >>> *From:* Rajeev Agarwal <[email protected]> >>> *To:* Nikos Balkanas <[email protected]> >>> *Cc:* [email protected] >>> *Sent:* Friday, December 11, 2009 10:41 AM >>> *Subject:* Re: Sony Ericsson for Kannel >>> >>> hi! >>> >>> after dmesg | grep tty i got the following >>> >>> [ 0.004000] console [tty0] enabled >>> [ 1.276807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> [ 1.277100] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> [10283.432323] cdc_acm 8-2:1.0: ttyACM0: USB ACM device >>> [10387.225333] cdc_acm 8-1:1.0: ttyACM0: USB ACM device >>> [10570.342537] cdc_acm 8-2:1.0: ttyACM0: USB ACM device >>> >>> >>> how do i decode the above stuff??? >>> >>> 2009/12/11 Nikos Balkanas <[email protected]> >>> >>>> Hi, >>>> >>>> If it is not a modem you cannot use it as an SMSc. And without an SMSc >>>> you cannot send/receive SMS. >>>> >>>> As Isaac suggested, with your modem connected to your server, after >>>> rebooting, do: >>>> >>>> >>>> If you don't get anything, your mobile is not a modem, and you cannot >>>> use it. To send/receive SMS you will have to either get an SMSc connection >>>> or get a GPRS modem. >>>> >>>> BR, >>>> Nikos >>>> >>>> ----- Original Message ----- >>>> *From:* Rajeev Agarwal <[email protected]> >>>> *To:* Nikos Balkanas <[email protected]> >>>> *Cc:* [email protected] >>>> *Sent:* Friday, December 11, 2009 10:22 AM >>>> *Subject:* Re: Sony Ericsson for Kannel >>>> >>>> hi >>>> yes the mobile does have a USB port. >>>> >>>> If it is not modem should i remove the modem details from the conf file? >>>> >>>> btw have a look at this >>>> >>>> raj...@insi:~/Desktop$ <raj...@insi:%7E/Desktop$> ls -lrt /dev/ttyA* >>>> crw-rw---- 1 root dialout 166, 0 2009-12-11 12:44 /dev/ttyACM0 >>>> >>>> >>>> 2009/12/11 Nikos Balkanas <[email protected]> >>>> >>>>> Hi, >>>>> >>>>> If the mobile is not detected by the OS, you won't need an init string. >>>>> Simply put the mobile is not a modem. >>>>> >>>>> Does the mobile feature a USB or serial port? >>>>> >>>>> BR, >>>>> Nikos >>>>> >>>>> ----- Original Message ----- >>>>> *From:* Rajeev Agarwal <[email protected]> >>>>> *To:* Isaac Sanni-Thomas <[email protected]> >>>>> *Cc:* [email protected] >>>>> *Sent:* Friday, December 11, 2009 9:25 AM >>>>> *Subject:* Re: Sony Ericsson for Kannel >>>>> >>>>> that ain't working! >>>>> >>>>> how to i get the init string? >>>>> >>>>> 2009/12/11 Isaac Sanni-Thomas <[email protected]> >>>>> >>>>>> >>>>>> >>>>>> On 12/11/2009 05:45 AM, Rajeev Agarwal wrote: >>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> I was wondering is it possible to use a Sony Ericsson W 580i phone as >>>>>>> a >>>>>>> modem for sending sms? >>>>>>> >>>>>>> >>>>>>> I havent used a Sony Ericsson but rather a Nokia. >>>>>> However you can setup the modem group and smsc group as shown in the >>>>>> user guide. >>>>>> To be sure the phone can be used, do this: >>>>>> Connect the phone to the computer and as root do this >>>>>> r...@your-computer#dmesg|grep -i "Sony" >>>>>> r...@your-computer#tail -n30 /var/log/messages|grep -i "Sony" >>>>>> >>>>>> You must see a link to the device file /dev/ttyACM0 or something >>>>>> similar which shows connection to your phone. >>>>>> Configure kannel accordingly to use the device file that points to >>>>>> your phone. Read the user manual on configuring group=modems group=smsc >>>>>> for >>>>>> using phones as virtual smsc. >>>>>> >>>>>>> Regards >>>>>>> >>>>>>> Rajeev. >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
